# Bulk density calculator (Cylinder) in g/cm³ | NovaLIMS

> Free bulk density calculator by the cylinder method (IS 2720 (Part 29)). Enter your readings to get bulk density in g/cm³, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/bulk-density

## How bulk density is calculated

Free bulk density calculator (cylinder method), following IS 2720 (Part 29), IS 16556. Enter 3 readings to get bulk density in g/cm³, with the formula filled in step by step.

1.  ### Bulk density · g/cm³
    
    `BD = (W2 − W1) / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| W1 | Weight of the dry 100 ml cylinder | g | usually 10–500 g |
| W2 | Weight of the cylinder with sample | g | usually 10–1000 g |
| V | Volume of the sample after compaction | ml | usually 10–100 ml |

## Worked example

Readings:

-   Weight of the dry 100 ml cylinder: **W1 = 92.4 g**
-   Weight of the cylinder with sample: **W2 = 218.6 g**
-   Volume of the sample after compaction: **V = 96 ml**

1.  ### Bulk density
    
    `BD = (218.6 − 92.4) / 96 = 1.315 g/cm³`
    

Result: Bulk density **1.315 g/cm³**.

## Checks and units

-   **Typical values:** Most mineral soils: 1.1–1.6 g/cm³
-   The cylinder with sample (W2) must weigh more than the empty cylinder (W1).

## Questions

### How do you calculate bulk density by the cylinder method?

Bulk density = (W2 − W1) / V. Here W1 is the weight of the dry 100 ml cylinder (g), W2 is the weight of the cylinder with sample (g), V is the volume of the sample after compaction (ml). The result is in g/cm³.

### What unit is bulk density reported in?

Bulk density is reported in g/cm³, to 3 decimal places.

### Which standard does this bulk density calculation follow?

It follows the calculation in IS 2720 (Part 29), IS 16556. Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With weight of the dry 100 ml cylinder = 92.4 g, weight of the cylinder with sample = 218.6 g, volume of the sample after compaction = 96 ml, the result is bulk density = 1.315 g/cm³.

### What is a typical bulk density value?

Most mineral soils: 1.1–1.6 g/cm³

### What mistakes should I look out for?

The cylinder with sample (W2) must weigh more than the empty cylinder (W1).

### Is this bulk density calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Last reviewed 10 November 2026. Version 1. Follows IS 2720 (Part 29), IS 16556. [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
