# Calcium hardness calculator (EDTA titrimetric) in mg/L | NovaLIMS

> Free calcium hardness calculator by the EDTA titrimetric method (IS 3025 (Part 40)). Enter your readings to get calcium hardness as CaCO₃ in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/calcium-hardness

## How calcium hardness is calculated

Free calcium hardness calculator (EDTA titrimetric method), following IS 3025 (Part 40). Enter 3 readings to get calcium hardness as CaCO₃ in mg/L, with the formula filled in step by step.

1.  ### Calcium hardness as CaCO₃ · mg/L
    
    `CaH = A × B × 1000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| A | EDTA used for sample | ml | usually 0–50 ml (a 50 ml burette) |
| B | mg CaCO₃ equal to 1.0 ml EDTA | mg/ml | usually 0.5–1.5 mg/ml |

## Worked example

Readings:

-   Volume of sample taken: **V = 50 ml**
-   EDTA used for sample: **A = 7 ml**
-   mg CaCO₃ equal to 1.0 ml EDTA: **B = 1 mg/ml**

1.  ### Calcium hardness as CaCO₃
    
    `CaH = 7 × 1 × 1000 / 50 = 140.0 mg/L`
    

Result: Calcium hardness as CaCO₃ **140.0 mg/L**.

## Checks and units

-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of CaCO₃: 50).

## Questions

### How do you calculate calcium hardness by the EDTA titrimetric method?

Calcium hardness as CaCO₃ = A × B × 1000 / V. Here V is the volume of sample taken (ml), A is the EDTA used for sample (ml), B is the mg CaCO₃ equal to 1.0 ml EDTA (mg/ml). The result is in mg/L.

### What unit is calcium hardness reported in?

Calcium hardness as CaCO₃ is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of CaCO₃: 50).

### Which standard does this calcium hardness calculation follow?

It follows the calculation in IS 3025 (Part 40). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 50 ml, EDTA used for sample = 7 ml, mg CaCO₃ equal to 1.0 ml EDTA = 1 mg/ml, the result is calcium hardness as CaCO₃ = 140.0 mg/L.

### Is this calcium hardness calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Calcium (EDTA titrimetric): Hardness & ions](https://novalims.in/tools/calculators/calcium)
-   [Chloride (Argentometric): Hardness & ions](https://novalims.in/tools/calculators/chloride)
-   [Fluoride (SPADNS): Hardness & ions](https://novalims.in/tools/calculators/fluoride)
-   [Magnesium (Calculation): Hardness & ions](https://novalims.in/tools/calculators/magnesium)
-   [Magnesium hardness (Calculation): Hardness & ions](https://novalims.in/tools/calculators/magnesium-hardness)
-   [Potassium (Flame photometric): Hardness & ions](https://novalims.in/tools/calculators/potassium-flame)
-   [Sodium (Flame photometric): Hardness & ions](https://novalims.in/tools/calculators/sodium-flame)
-   [Sulphate (Turbidimetric): Hardness & ions](https://novalims.in/tools/calculators/sulphate)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 40). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
