Skip to content
STABLEH₂O

Moisture

Oven dryingResult in %IS 16556

Weighed before and after drying

Formula
M =100×(B−C)(B−A)

Your readings

3 of 3 filled

Example values shown.

g
g
g
Moisture, by massCalculated live as you type
18.40 %%
Within the usual range. Compost: usually 15–25%.

Calculations you finish this week are counted here, on this device only.

How moisture is calculated

Free moisture calculator (oven drying method), following IS 16556. Enter 3 readings to get Moisture, by mass in %, with the formula filled in step by step.

  1. Moisture, by mass · %

    M = 100 × (B − C) / (B − A)

What you need

SymbolReadingUnitNotes
AMass of the Petri dishgusually 1–200 g
BMass of dish with sample before dryinggusually 1–500 g
CMass of dish with sample after dryinggusually 1–500 g

Worked example

Readings:

  • Mass of the Petri dish: A = 42.1 g
  • Mass of dish with sample before drying: B = 62.1 g
  • Mass of dish with sample after drying: C = 58.42 g
  1. Moisture, by mass

    M = 100 × (62.1 − 58.42) / (62.1 − 42.1) = 18.40 %

Result: Moisture, by mass 18.40 %.

Checks and units

  • Typical values: Compost: usually 15–25%
  • The sample weighs more after drying (C) than before (B).
  • The dish with sample (B) must weigh more than the empty dish (A).

Questions

How do you calculate moisture by the oven drying method?

Moisture, by mass = 100 × (B − C) / (B − A). Here A is the mass of the Petri dish (g), B is the mass of dish with sample before drying (g), C is the mass of dish with sample after drying (g). The result is in %.

What unit is moisture reported in?

Moisture, by mass is reported in %, to 2 decimal places.

Which standard does this moisture calculation follow?

It follows the calculation in IS 16556. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With mass of the Petri dish = 42.1 g, mass of dish with sample before drying = 62.1 g, mass of dish with sample after drying = 58.42 g, the result is Moisture, by mass = 18.40 %.

What is a typical moisture value?

Compost: usually 15–25%

What mistakes should I look out for?

The sample weighs more after drying (C) than before (B). The dish with sample (B) must weigh more than the empty dish (A).

Is this moisture calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.