Skip to content
N

Total nitrogen

Kjeldahl (back titration)Result in %IS 16556

Back titration of the excess acid

Formula
TN =1.401×((V₁×N₁−V₂×N₂)−(V₃×N₁−V₄×N₂))×dfW

Your readings

8 of 8 filled

Example values shown.

ml
ml
ml
ml
N
N
g
Factor (14.01 ÷ 10)Constant · fixed by the method1.401🔒
Total nitrogen as N, of dry massCalculated live as you type
1.43 %%
Within the usual range. Fertiliser Control Order: at least 0.8% for compost.

Calculations you finish this week are counted here, on this device only.

How total nitrogen is calculated

Free total nitrogen calculator (kjeldahl (back titration) method), following IS 16556. Enter 8 readings to get total nitrogen as N, of dry mass in %, with the formula filled in step by step.

  1. Total nitrogen as N, of dry mass · %

    TN = 1.401 × ((V₁ × N₁ − V₂ × N₂) − (V₃ × N₁ − V₄ × N₂)) × df / W

What you need

SymbolReadingUnitNotes
V₁Standard acid taken in the receiver for the samplemlusually 1–100 ml
V₂Standard NaOH used for the samplemlusually 0–100 ml
V₃Standard acid taken in the receiver for the blankmlusually 1–100 ml
V₄Standard NaOH used for the blankmlusually 0–100 ml
N₁Normality of standard acidNusually 0.01–1 N
N₂Normality of standard NaOHNusually 0.01–1 N
WWeight of sample takengusually 0.1–10 g
dfDilution factor—usually 1–100

Fixed values in the formula

SymbolConstantValue
1.401Factor (14.01 ÷ 10)1.401

Worked example

Readings:

  • Standard acid taken in the receiver for the sample: V₁ = 25 ml
  • Standard NaOH used for the sample: V₂ = 14.6 ml
  • Standard acid taken in the receiver for the blank: V₃ = 25 ml
  • Standard NaOH used for the blank: V₄ = 24.8 ml
  • Normality of standard acid: N₁ = 0.1 N
  • Normality of standard NaOH: N₂ = 0.1 N
  • Weight of sample taken: W = 1 g
  • Dilution factor: df = 1
  1. Total nitrogen as N, of dry mass

    TN = 1.401 × ((25 × 0.1 − 14.6 × 0.1) − (25 × 0.1 − 24.8 × 0.1)) × 1 / 1 = 1.43 %

Result: Total nitrogen as N, of dry mass 1.43 %.

Checks and units

  • Typical values: Fertiliser Control Order: at least 0.8% for compost

Questions

How do you calculate total nitrogen by the kjeldahl (back titration) method?

Total nitrogen as N, of dry mass = 1.401 × ((V₁ × N₁ − V₂ × N₂) − (V₃ × N₁ − V₄ × N₂)) × df / W. Here V₁ is the standard acid taken in the receiver for the sample (ml), V₂ is the standard NaOH used for the sample (ml), V₃ is the standard acid taken in the receiver for the blank (ml), V₄ is the standard NaOH used for the blank (ml), N₁ is the normality of standard acid (N), N₂ is the normality of standard NaOH (N), W is the weight of sample taken (g), df is the dilution factor. The result is in %.

What unit is total nitrogen reported in?

Total nitrogen as N, of dry mass is reported in %, to 2 decimal places.

Which standard does this total nitrogen calculation follow?

It follows the calculation in IS 16556. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With standard acid taken in the receiver for the sample = 25 ml, standard NaOH used for the sample = 14.6 ml, standard acid taken in the receiver for the blank = 25 ml, standard NaOH used for the blank = 24.8 ml, normality of standard acid = 0.1 N, normality of standard NaOH = 0.1 N, weight of sample taken = 1 g, dilution factor = 1, the result is total nitrogen as N, of dry mass = 1.43 %.

What is a typical total nitrogen value?

Fertiliser Control Order: at least 0.8% for compost

Is this total nitrogen calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All compost & manure calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.