Skip to content
O₂

Dissolved oxygen

Winkler (iodometric)Result in mg/LIS 3025 (Part 38)

Blue → colourless at the endpoint (starch)

With 0.025 N thiosulphate and a 200 ml sample, 1 ml of titrant equals 1 mg/L DO.

Formula
DO =A×N×8000V

Your readings

3 of 3 filled

Example values shown.

ml
N
ml
Equivalent weight of oxygen × 1000Constant · fixed by the method8000🔒
Dissolved oxygenCalculated live as you type
6.80 mg/L
Within the usual range. Saturation at 25 °C is about 8.3 mg/L.

Calculations you finish this week are counted here, on this device only.

How dissolved oxygen is calculated

Free dissolved oxygen calculator (winkler (iodometric) method), following IS 3025 (Part 38). Enter 3 readings to get dissolved oxygen in mg/L, with the formula filled in step by step.

  1. Dissolved oxygen · mg/L

    DO = A × N × 8000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample titratedmlusually 50–300 ml
NNormality of Na₂S₂O₃Nusually 0.005–0.1 N
ANa₂S₂O₃ used for samplemlusually 0–50 ml (a 50 ml burette)

Fixed values in the formula

SymbolConstantValue
8000Equivalent weight of oxygen × 10008000

Worked example

Readings:

  • Volume of sample titrated: V = 200 ml
  • Normality of Na₂S₂O₃: N = 0.025 N
  • Na₂S₂O₃ used for sample: A = 6.8 ml
  1. Dissolved oxygen

    DO = 6.8 × 0.025 × 8000 / 200 = 6.80 mg/L

Result: Dissolved oxygen 6.80 mg/L.

Checks and units

  • Typical values: Saturation at 25 °C is about 8.3 mg/L
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate dissolved oxygen by the winkler (iodometric) method?

Dissolved oxygen = A × N × 8000 / V. Here V is the volume of sample titrated (ml), N is the normality of Na₂S₂O₃ (N), A is the Na₂S₂O₃ used for sample (ml). The result is in mg/L.

What unit is dissolved oxygen reported in?

Dissolved oxygen is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this dissolved oxygen calculation follow?

It follows the calculation in IS 3025 (Part 38). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample titrated = 200 ml, normality of Na₂S₂O₃ = 0.025 N, Na₂S₂O₃ used for sample = 6.8 ml, the result is dissolved oxygen = 6.80 mg/L.

What is a typical dissolved oxygen value?

Saturation at 25 °C is about 8.3 mg/L

Is this dissolved oxygen calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.