# Fluoride calculator (SPADNS) in mg/L | NovaLIMS

> Free fluoride calculator by the SPADNS method (IS 3025 (Part 60)). Enter your readings to get fluoride as F⁻ in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/fluoride

## How fluoride is calculated

Free fluoride calculator (SPADNS method), following IS 3025 (Part 60). Enter 5 readings to get fluoride as F⁻ in mg/L, with the formula filled in step by step.

1.  ### Fluoride as F⁻ · mg/L
    
    `F⁻ = (A₀ − Aₓ) / (A₀ − A₁) × D`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| A₀ | Absorbance of the blank | Abs | usually 0–2 Abs (the usual 0–2 absorbance range) |
| Aₓ | Absorbance of the sample | Abs | usually 0–2 Abs (the usual 0–2 absorbance range) |
| A₁ | Absorbance of a 1 mg/L fluoride standard | Abs | usually 0–2 Abs (the usual 0–2 absorbance range) |
| D | Dilution factor | — | usually 1–1000 |

## Worked example

Readings:

-   Volume of sample taken: **V = 50 ml**
-   Absorbance of the blank: **A₀ = 0.512 Abs**
-   Absorbance of the sample: **Aₓ = 0.398 Abs**
-   Absorbance of a 1 mg/L fluoride standard: **A₁ = 0.306 Abs**
-   Dilution factor: **D = 1**

1.  ### Fluoride as F⁻
    
    `F⁻ = (0.512 − 0.398) / (0.512 − 0.306) × 1 = 0.55 mg/L`
    

Result: Fluoride as F⁻ **0.55 mg/L**.

## Checks and units

-   **Typical values:** Drinking water: acceptable up to 1.0 mg/L
-   The sample absorbance is above the blank; fluoride bleaches the colour, so check the readings.
-   The blank and the standard read the same: the standard can't be used.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of F⁻: 19).

## Questions

### How do you calculate fluoride by the SPADNS method?

Fluoride as F⁻ = (A₀ − Aₓ) / (A₀ − A₁) × D. Here V is the volume of sample taken (ml), A₀ is the absorbance of the blank (Abs), Aₓ is the absorbance of the sample (Abs), A₁ is the absorbance of a 1 mg/L fluoride standard (Abs), D is the dilution factor. The result is in mg/L.

### What unit is fluoride reported in?

Fluoride as F⁻ is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of F⁻: 19).

### Which standard does this fluoride calculation follow?

It follows the calculation in IS 3025 (Part 60). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 50 ml, absorbance of the blank = 0.512 Abs, absorbance of the sample = 0.398 Abs, absorbance of a 1 mg/L fluoride standard = 0.306 Abs, dilution factor = 1, the result is fluoride as F⁻ = 0.55 mg/L.

### What is a typical fluoride value?

Drinking water: acceptable up to 1.0 mg/L

### What mistakes should I look out for?

The sample absorbance is above the blank; fluoride bleaches the colour, so check the readings. The blank and the standard read the same: the standard can't be used.

### Is this fluoride calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Calcium (EDTA titrimetric): Hardness & ions](https://novalims.in/tools/calculators/calcium)
-   [Calcium hardness (EDTA titrimetric): Hardness & ions](https://novalims.in/tools/calculators/calcium-hardness)
-   [Chloride (Argentometric): Hardness & ions](https://novalims.in/tools/calculators/chloride)
-   [Magnesium (Calculation): Hardness & ions](https://novalims.in/tools/calculators/magnesium)
-   [Magnesium hardness (Calculation): Hardness & ions](https://novalims.in/tools/calculators/magnesium-hardness)
-   [Potassium (Flame photometric): Hardness & ions](https://novalims.in/tools/calculators/potassium-flame)
-   [Sodium (Flame photometric): Hardness & ions](https://novalims.in/tools/calculators/sodium-flame)
-   [Sulphate (Turbidimetric): Hardness & ions](https://novalims.in/tools/calculators/sulphate)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 60). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
