Skip to content
ppm

Gas concentration units

ppm ↔ mg/m³ ↔ µg/m³ ↔ ppbResult in mg/m³IS 5182

Unit conversion at 25 °C and 1 atm

At 25 °C and 1 atm one mole of gas occupies 24.45 litres.

Formulas, in order
Concentration · mg/m³
mg =ppm×MW24.45
Concentration · µg/m³
ug =ppm×MW24.45×1000
Concentration · ppb
ppb =ppm×1000

Your readings

2 of 2 filled

Example values shown.

g/mol
ppm
Molar volume at 25 °C and 1 atmConstant · fixed by the method24.45L
ConcentrationCalculated live as you type
1.5973 mg/m³mg/m³
  • Concentration1,597.34 µg/m³
  • Concentration500.00 ppb
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How gas concentration units is calculated

Free gas concentration units calculator (ppm ↔ mg/m³ ↔ µg/m³ ↔ ppb method), following IS 5182. Enter 2 readings to get concentration in mg/m³, with the formula filled in step by step.

  1. Concentration · mg/m³

    mg = ppm × MW / 24.45

  2. Concentration · µg/m³

    ug = ppm × MW / 24.45 × 1000

  3. Concentration · ppb

    ppb = ppm × 1000

What you need

SymbolReadingUnitNotes
MWGas (molecular weight)g/molchoose: Sulphur dioxide (SO₂), Nitrogen dioxide (NO₂), Carbon monoxide (CO), Carbon dioxide (CO₂), Ammonia (NH₃), Ozone (O₃), Hydrogen sulphide (H₂S), Formaldehyde (CH₂O), Total VOCs (as isobutylene), Acetaldehyde, Benzene, Carbon disulphide, Carbon tetrachloride, Chlorobenzene, Chloroform, 1,4-Dichlorobenzene, 1,1-Dichloroethylene, N,N-Dimethylformamide, 1,4-Dioxane, Epichlorohydrin, Ethylbenzene, Ethylene glycol, Ethylene glycol monoethyl ether, Ethylene glycol monoethyl ether acetate, Ethylene glycol monomethyl ether, Ethylene glycol monomethyl ether acetate, n-Hexane, Isophorone, Isopropanol, Methyl chloroform, Methylene chloride, Methyl t-butyl ether, Naphthalene, Phenol, Propylene glycol monomethyl ether, Styrene, Tetrachloroethylene, Toluene, Trichloroethylene, Vinyl acetate, m-Xylene, o-Xylene, p-Xylene; usually 1–300 g/mol
ppmConcentrationppmusually 0–10000 ppm

Fixed values in the formula

SymbolConstantValue
24.45Molar volume at 25 °C and 1 atm24.45 L

Worked example

Readings:

  • Gas (molecular weight): MW = 78.11 g/mol
  • Concentration: ppm = 0.5 ppm
  1. Concentration

    mg = 0.5 × 78.11 / 24.45 = 1.5973 mg/m³

  2. Concentration

    ug = 0.5 × 78.11 / 24.45 × 1000 = 1,597.34 µg/m³

  3. Concentration

    ppb = 0.5 × 1000 = 500.00 ppb

Result: Concentration 1.5973 mg/m³; concentration 1,597.34 µg/m³; concentration 500.00 ppb.

Questions

How do you calculate gas concentration units by the ppm ↔ mg/m³ ↔ µg/m³ ↔ ppb method?

Work through 3 steps in order. Concentration: mg = ppm × MW / 24.45. Concentration: ug = ppm × MW / 24.45 × 1000. Concentration: ppb = ppm × 1000. Here MW is the gas (molecular weight) (g/mol), ppm is the concentration (ppm). The result is in mg/m³.

What unit is gas concentration units reported in?

Concentration is reported in mg/m³, to 4 decimal places.

Which standard does this gas concentration units calculation follow?

It follows the calculation in IS 5182. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With gas (molecular weight) = 78.11 g/mol, concentration = 0.5 ppm, the result is concentration = 1.5973 mg/m³ and concentration = 1,597.34 µg/m³ and concentration = 500.00 ppb.

Is this gas concentration units calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.