Skip to content
lux

Illumination

Lux meter, grid of pointsResult in luxIS 3646 (Part 1)

Lux meter readings across the room

Formulas, in order
Average illuminance · lux
Eavg =avg(E)
Lowest · lux
Emin =min(E)
Highest · lux
Emax =max(E)
Uniformity (lowest ÷ average)
U =min(E)avg(E)

Your readings

1 of 1 filled

Example values shown.

PointEIlluminancelux
Point 1
Point 2
Point 3
Point 4
Point 5
Point 6
Point 7
Point 8
Point 9
Average illuminanceCalculated live as you type
400 luxlux
  • Lowest356 lux
  • Highest448 lux
  • Uniformity (lowest ÷ average)0.89
Within the usual range. Offices: about 300–500 lux.

Calculations you finish this week are counted here, on this device only.

How illumination is calculated

Free illumination calculator (lux meter, grid of points method), following IS 3646 (Part 1). Enter 1 reading to get average illuminance in lux, with the formula filled in step by step.

  1. Average illuminance · lux

    Eavg = avg(E)

  2. Lowest · lux

    Emin = min(E)

  3. Highest · lux

    Emax = max(E)

  4. Uniformity (lowest ÷ average)

    U = min(E) / avg(E)

What you need

SymbolReadingUnitNotes
EIlluminanceluxone per point; usually 1–100000 lux

Worked example

Readings:

  • Illuminance: E = 410, 385, 402, 356, 448, 421, 390, 372, 415 lux
  1. Average illuminance

    Eavg = avg(410, 385, 402, 356, 448, 421, 390, 372, 415) = 400 lux

  2. Lowest

    Emin = min(410, 385, 402, 356, 448, 421, 390, 372, 415) = 356 lux

  3. Highest

    Emax = max(410, 385, 402, 356, 448, 421, 390, 372, 415) = 448 lux

  4. Uniformity (lowest ÷ average)

    U = min(410, 385, 402, 356, 448, 421, 390, 372, 415) / avg(410, 385, 402, 356, 448, 421, 390, 372, 415) = 0.89

Result: Average illuminance 400 lux; lowest 356 lux; highest 448 lux; uniformity (lowest ÷ average) 0.89.

Checks and units

  • Typical values: Offices: about 300–500 lux

Questions

How do you calculate illumination by the lux meter, grid of points method?

Work through 4 steps in order. Average illuminance: Eavg = avg(E). Lowest: Emin = min(E). Highest: Emax = max(E). Uniformity (lowest ÷ average): U = min(E) / avg(E). The result is in lux.

What unit is illumination reported in?

Average illuminance is reported in lux, to 0 decimal places.

Which standard does this illumination calculation follow?

It follows the calculation in IS 3646 (Part 1). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With illuminance = 410, 385, 402, 356, 448, 421, 390, 372, 415 lux, the result is average illuminance = 400 lux and lowest = 356 lux and highest = 448 lux and uniformity (lowest ÷ average) = 0.89.

What is a typical illumination value?

Offices: about 300–500 lux

Is this illumination calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.