# MLSS calculator (Gravimetric) in mg/L | NovaLIMS

> Free MLSS calculator by the gravimetric method (APHA 2540 D). Enter your readings to get mixed liquor suspended solids in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/mlss

## How MLSS is calculated

Free MLSS calculator (gravimetric method), following APHA 2540 D. Enter 3 readings to get mixed liquor suspended solids in mg/L, with the formula filled in step by step.

1.  ### Mixed liquor suspended solids · mg/L
    
    `MLSS = (W2 − W1) × 1000000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| W1 | Weight of empty filter paper (W1) | g | usually 0–200 g |
| W2 | Weight of filter with residue after drying (W2) | g | usually 0–200 g |

## Worked example

Readings:

-   Volume of sample taken: **V = 25 ml**
-   Weight of empty filter paper (W1): **W1 = 0.1124 g**
-   Weight of filter with residue after drying (W2): **W2 = 0.1872 g**

1.  ### Mixed liquor suspended solids
    
    `MLSS = (0.1872 − 0.1124) × 1000000 / 25 = 2,992.0 mg/L`
    

Result: Mixed liquor suspended solids **2,992.0 mg/L**.

## Checks and units

-   **Typical values:** Activated sludge aeration tanks: usually 1,500–4,000 mg/L
-   The weight after (W2) is less than before (W1). Check the weighings.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate MLSS by the gravimetric method?

Mixed liquor suspended solids = (W2 − W1) × 1000000 / V. Here V is the volume of sample taken (ml), W1 is the weight of empty filter paper (W1) (g), W2 is the weight of filter with residue after drying (W2) (g). The result is in mg/L.

### What unit is MLSS reported in?

Mixed liquor suspended solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this MLSS calculation follow?

It follows the calculation in APHA 2540 D. Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 25 ml, weight of empty filter paper (W1) = 0.1124 g, weight of filter with residue after drying (W2) = 0.1872 g, the result is mixed liquor suspended solids = 2,992.0 mg/L.

### What is a typical MLSS value?

Activated sludge aeration tanks: usually 1,500–4,000 mg/L

### What mistakes should I look out for?

The weight after (W2) is less than before (W1). Check the weighings.

### Is this MLSS calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [MLVSS – Gravimetric (ignition): Activated sludge](https://novalims.in/tools/calculators/mlvss)
-   [Sludge volume index (Calculation): Activated sludge](https://novalims.in/tools/calculators/sludge-volume-index)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows APHA 2540 D. [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
