# Ammonia calculator (Colorimetric) in µg/m³ | NovaLIMS

> Free ammonia calculator by the colorimetric method (IS 5182 (Part 25)). Enter your readings to get ammonia in µg/m³, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/nh3-ambient

## How ammonia is calculated

Free ammonia calculator (colorimetric method), following IS 5182 (Part 25). Enter 5 readings to get ammonia in µg/m³, with the formula filled in step by step.

1.  ### Volume of air sampled · m³
    
    `Va = Q × t / 1000`
    
2.  ### Ammonia · µg/m³
    
    `NH₃ = (Aₛ − A_b) × CF / Va`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| CF | Calibration factor | µg per Abs | usually 0.1–200 µg per Abs |
| Q | Average flow rate | L/min | usually 0.1–5 L/min |
| t | Sampling time | min | usually 10–1440 min |
| Aₛ | Absorbance of sample | Abs | usually 0–2 Abs |
| A_b | Absorbance of blank | Abs | usually 0–0.2 Abs |

## Worked example

Readings:

-   Calibration factor: **CF = 42 µg per Abs**
-   Average flow rate: **Q = 1 L/min**
-   Sampling time: **t = 480 min**
-   Absorbance of sample: **Aₛ = 0.118 Abs**
-   Absorbance of blank: **A\_b = 0.012 Abs**

1.  ### Volume of air sampled
    
    `Va = 1 × 480 / 1000 = 0.4800 m³`
    
2.  ### Ammonia
    
    `NH₃ = (0.118 − 0.012) × 42 / 0.4800 = 9.3 µg/m³`
    

Result: Ammonia **9.3 µg/m³**.

## Checks and units

-   **Typical values:** 24-hour standard (NAAQS): 400 µg/m³
-   The sample absorbance is lower than the blank, so the result would be negative.

## Questions

### How do you calculate ammonia by the colorimetric method?

Work through 2 steps in order. Volume of air sampled: Va = Q × t / 1000. Ammonia: NH₃ = (Aₛ − A\_b) × CF / Va. Here CF is the calibration factor (µg per Abs), Q is the average flow rate (L/min), t is the sampling time (min), Aₛ is the absorbance of sample (Abs), A\_b is the absorbance of blank (Abs). The result is in µg/m³.

### What unit is ammonia reported in?

Ammonia is reported in µg/m³, to 1 decimal place.

### Which standard does this ammonia calculation follow?

It follows the calculation in IS 5182 (Part 25). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With calibration factor = 42 µg per Abs, average flow rate = 1 L/min, sampling time = 480 min, absorbance of sample = 0.118 Abs, absorbance of blank = 0.012 Abs, the result is ammonia = 9.3 µg/m³.

### What is a typical ammonia value?

24-hour standard (NAAQS): 400 µg/m³

### What mistakes should I look out for?

The sample absorbance is lower than the blank, so the result would be negative.

### Is this ammonia calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Carbon monoxide – NDIR (ppm to mg/m³): Gases](https://novalims.in/tools/calculators/co-ambient)
-   [Nitrogen dioxide – Modified Jacobs and Hochheiser (by shift): Gases](https://novalims.in/tools/calculators/no2-ambient)
-   [Ozone (Colorimetric): Gases](https://novalims.in/tools/calculators/o3-ambient)
-   [Sulphur dioxide – Improved West and Gaeke (by shift): Gases](https://novalims.in/tools/calculators/so2-ambient)

[All ambient air calculators →](https://novalims.in/tools/calculators/ambient-air)

Last reviewed 10 November 2026. Version 1. Follows IS 5182 (Part 25). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
