# Organic solids calculator – Gravimetric (ignition) | NovaLIMS

> Free organic solids calculator by the gravimetric (ignition) method (IS 3025 (Part 18)). Enter your readings to get organic (volatile) solids in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/organic-solids

## How organic solids is calculated

Free organic solids calculator (gravimetric (ignition) method), following IS 3025 (Part 18). Enter 3 readings to get organic (volatile) solids in mg/L, with the formula filled in step by step.

1.  ### Organic (volatile) solids · mg/L
    
    `OS = (W2 − W3) × 1000000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| W3 | Weight of dish with residue after ignition (W3) | g | usually 0–200 g |
| W2 | Weight of dish with residue before ignition (W2) | g | usually 0–200 g |

## Worked example

Readings:

-   Volume of sample taken: **V = 100 ml**
-   Weight of dish with residue after ignition (W3): **W3 = 45.1488 g**
-   Weight of dish with residue before ignition (W2): **W2 = 45.1702 g**

1.  ### Organic (volatile) solids
    
    `OS = (45.1702 − 45.1488) × 1000000 / 100 = 214.0 mg/L`
    

Result: Organic (volatile) solids **214.0 mg/L**.

## Checks and units

-   The weight after (W2) is less than before (W3). Check the weighings.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate organic solids by the gravimetric (ignition) method?

Organic (volatile) solids = (W2 − W3) × 1000000 / V. Here V is the volume of sample taken (ml), W3 is the weight of dish with residue after ignition (W3) (g), W2 is the weight of dish with residue before ignition (W2) (g). The result is in mg/L.

### What unit is organic solids reported in?

Organic (volatile) solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this organic solids calculation follow?

It follows the calculation in IS 3025 (Part 18). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 100 ml, weight of dish with residue after ignition (W3) = 45.1488 g, weight of dish with residue before ignition (W2) = 45.1702 g, the result is organic (volatile) solids = 214.0 mg/L.

### What mistakes should I look out for?

The weight after (W2) is less than before (W3). Check the weighings.

### Is this organic solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Inorganic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/inorganic-solids)
-   [Settleable solids (Calculation): Solids](https://novalims.in/tools/calculators/settleable-solids)
-   [Total dissolved solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-dissolved-solids)
-   [Total solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-solids)
-   [Total suspended solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-suspended-solids)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 18). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
