# Residual sodium carbonate calculator (Calculation) in meq/L | NovaLIMS

> Free residual sodium carbonate calculator by the calculation method (IS 11624). Enter your readings to get residual sodium carbonate in meq/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/residual-sodium-carbonate

## How residual sodium carbonate is calculated

Free residual sodium carbonate calculator (calculation method), following IS 11624. Enter 2 readings to get residual sodium carbonate in meq/L, with the formula filled in step by step.

1.  ### Residual sodium carbonate · meq/L
    
    `RSC = ALK / 50 − TH / 50`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| ALK | Total alkalinity as CaCO₃ | mg/L | usually 0–1000 mg/L |
| TH | Total hardness as CaCO₃ | mg/L | usually 0–2000 mg/L |

### Fixed values in the formula

| Symbol | Constant | Value |
| --- | --- | --- |
| 50 | Equivalent weight of CaCO₃ | 50 |

## Worked example

Readings:

-   Total alkalinity as CaCO₃: **ALK = 260 mg/L**
-   Total hardness as CaCO₃: **TH = 212 mg/L**

1.  ### Residual sodium carbonate
    
    `RSC = 260 / 50 − 212 / 50 = 0.96 meq/L`
    

Result: Residual sodium carbonate **0.96 meq/L**.

## Checks and units

-   **Typical values:** Below 1.25 meq/L is safe for irrigation

## Questions

### How do you calculate residual sodium carbonate by the calculation method?

Residual sodium carbonate = ALK / 50 − TH / 50. Here ALK is the total alkalinity as CaCO₃ (mg/L), TH is the total hardness as CaCO₃ (mg/L). The result is in meq/L.

### What unit is residual sodium carbonate reported in?

Residual sodium carbonate is reported in meq/L, to 2 decimal places.

### Which standard does this residual sodium carbonate calculation follow?

It follows the calculation in IS 11624. Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With total alkalinity as CaCO₃ = 260 mg/L, total hardness as CaCO₃ = 212 mg/L, the result is residual sodium carbonate = 0.96 meq/L.

### What is a typical residual sodium carbonate value?

Below 1.25 meq/L is safe for irrigation

### Is this residual sodium carbonate calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Sodium absorption ratio (Calculation): Irrigation indices](https://novalims.in/tools/calculators/sodium-absorption-ratio)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 11624. [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
