# Sludge volume index calculator (Calculation) in ml/g | NovaLIMS

> Free sludge volume index calculator by the calculation method (APHA 2710 D). Enter your readings to get sludge volume index in ml/g, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/sludge-volume-index

## How sludge volume index is calculated

Free sludge volume index calculator (calculation method), following APHA 2710 D. Enter 2 readings to get sludge volume index in ml/g, with the formula filled in step by step.

1.  ### Sludge volume index · ml/g
    
    `SVI = SV × 1000 / MLSS`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| SV | Settled sludge volume after 30 minutes | ml/L | usually 10–1000 ml/L |
| MLSS | Mixed liquor suspended solids | mg/L | usually 100–10000 mg/L |

## Worked example

Readings:

-   Settled sludge volume after 30 minutes: **SV = 280 ml/L**
-   Mixed liquor suspended solids: **MLSS = 2990 mg/L**

1.  ### Sludge volume index
    
    `SVI = 280 × 1000 / 2990 = 94 ml/g`
    

Result: Sludge volume index **94 ml/g**.

## Checks and units

-   **Typical values:** Good settling: about 50–150 ml/g

## Questions

### How do you calculate sludge volume index by the calculation method?

Sludge volume index = SV × 1000 / MLSS. Here SV is the settled sludge volume after 30 minutes (ml/L), MLSS is the mixed liquor suspended solids (mg/L). The result is in ml/g.

### What unit is sludge volume index reported in?

Sludge volume index is reported in ml/g, to 0 decimal places.

### Which standard does this sludge volume index calculation follow?

It follows the calculation in APHA 2710 D. Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With settled sludge volume after 30 minutes = 280 ml/L, mixed liquor suspended solids = 2990 mg/L, the result is sludge volume index = 94 ml/g.

### What is a typical sludge volume index value?

Good settling: about 50–150 ml/g

### Is this sludge volume index calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [MLSS (Gravimetric): Activated sludge](https://novalims.in/tools/calculators/mlss)
-   [MLVSS – Gravimetric (ignition): Activated sludge](https://novalims.in/tools/calculators/mlvss)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows APHA 2710 D. [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
