Skip to content
Cl⁻

Chloride

Argentometric (water extract)Result in mg/kgIS 2720 (Part 21)

Yellow → brick-red at the endpoint (chromate)

Formula
Cl⁻ =TV×N×35.45×V₁×1000(Ws×V₂)

Your readings

5 of 5 filled

Example values shown.

ml
N
ml
ml
g
Atomic weight of chlorineConstant · fixed by the method35.45🔒
Chloride as Cl⁻Calculated live as you type
160.0 mg/kgmg/kg
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How chloride is calculated

Free chloride calculator (argentometric (water extract) method), following IS 2720 (Part 21). Enter 5 readings to get chloride as Cl⁻ in mg/kg, with the formula filled in step by step.

  1. Chloride as Cl⁻ · mg/kg

    Cl⁻ = TV × N × 35.45 × V₁ × 1000 / (Ws × V₂)

What you need

SymbolReadingUnitNotes
TVAgNO₃ usedmlusually 0–50 ml (a 50 ml burette)
NNormality of AgNO₃Nusually 0.005–0.1 N
V₁Total volume of the extractmlusually 10–500 ml
V₂Aliquot taken for titrationmlusually 1–100 ml
WsWeight of soilgusually 1–100 g

Fixed values in the formula

SymbolConstantValue
35.45Atomic weight of chlorine35.45

Worked example

Readings:

  • AgNO₃ used: TV = 1.6 ml
  • Normality of AgNO₃: N = 0.0141 N
  • Total volume of the extract: V₁ = 100 ml
  • Aliquot taken for titration: V₂ = 25 ml
  • Weight of soil: Ws = 20 g
  1. Chloride as Cl⁻

    Cl⁻ = 1.6 × 0.0141 × 35.45 × 100 × 1000 / (20 × 25) = 160.0 mg/kg

Result: Chloride as Cl⁻ 160.0 mg/kg.

Questions

How do you calculate chloride by the argentometric (water extract) method?

Chloride as Cl⁻ = TV × N × 35.45 × V₁ × 1000 / (Ws × V₂). Here TV is the AgNO₃ used (ml), N is the normality of AgNO₃ (N), V₁ is the total volume of the extract (ml), V₂ is the aliquot taken for titration (ml), Ws is the weight of soil (g). The result is in mg/kg.

What unit is chloride reported in?

Chloride as Cl⁻ is reported in mg/kg, to 1 decimal place.

Which standard does this chloride calculation follow?

It follows the calculation in IS 2720 (Part 21). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With AgNO₃ used = 1.6 ml, normality of AgNO₃ = 0.0141 N, total volume of the extract = 100 ml, aliquot taken for titration = 25 ml, weight of soil = 20 g, the result is chloride as Cl⁻ = 160.0 mg/kg.

Is this chloride calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All soil calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.