# Particulate matter (stack) calculator (Isokinetic, gravimetric) in mg/Nm³ | NovaLIMS

> Free particulate matter (stack) calculator by the Isokinetic, gravimetric method (IS 11255 (Part 1)). Enter your readings to get particulate matter in mg/Nm³, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/stack-particulate-matter

## How particulate matter (stack) is calculated

Free particulate matter (stack) calculator (Isokinetic, gravimetric method), following IS 11255 (Part 1). Enter 6 readings to get particulate matter in mg/Nm³, with the formula filled in step by step.

1.  ### Volume sampled at normal conditions · Nm³
    
    `Vn = Vm × (298 / Tg) × (Pa − Pv) / 760`
    
2.  ### Particulate matter · mg/Nm³
    
    `PM = (W2 − W1) × 1000 / Vn`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| Vm | Volume of flue gas sampled (meter) | m³ | usually 0.1–10 m³ |
| Tg | Average gas meter temperature (absolute) | K | usually 273–330 K |
| Pa | Atmospheric pressure | mmHg | usually 600–800 mmHg |
| Pv | Average vacuum at the meter | mmHg | usually 0–200 mmHg |
| W1 | Initial weight of thimble | g | usually 0–50 g |
| W2 | Final weight of thimble with dust | g | usually 0–50 g |

## Worked example

Readings:

-   Volume of flue gas sampled (meter): **Vm = 1.2 m³**
-   Average gas meter temperature (absolute): **Tg = 305 K**
-   Atmospheric pressure: **Pa = 712 mmHg**
-   Average vacuum at the meter: **Pv = 38 mmHg**
-   Initial weight of thimble: **W1 = 4.152 g**
-   Final weight of thimble with dust: **W2 = 4.203 g**

1.  ### Volume sampled at normal conditions
    
    `Vn = 1.2 × (298 / 305) × (712 − 38) / 760 = 1.0398 Nm³`
    
2.  ### Particulate matter
    
    `PM = (4.203 − 4.152) × 1000 / 1.0398 = 49.0 mg/Nm³`
    

Result: Particulate matter **49.0 mg/Nm³**.

## Checks and units

-   **Typical values:** Typical limit for boilers: 150 mg/Nm³
-   The thimble weighs less after sampling.
-   The vacuum can't be more than atmospheric pressure.

## Questions

### How do you calculate particulate matter (stack) by the Isokinetic, gravimetric method?

Work through 2 steps in order. Volume sampled at normal conditions: Vn = Vm × (298 / Tg) × (Pa − Pv) / 760. Particulate matter: PM = (W2 − W1) × 1000 / Vn. Here Vm is the volume of flue gas sampled (meter) (m³), Tg is the average gas meter temperature (absolute) (K), Pa is the atmospheric pressure (mmHg), Pv is the average vacuum at the meter (mmHg), W1 is the initial weight of thimble (g), W2 is the final weight of thimble with dust (g). The result is in mg/Nm³.

### What unit is particulate matter (stack) reported in?

Particulate matter is reported in mg/Nm³, to 1 decimal place.

### Which standard does this particulate matter (stack) calculation follow?

It follows the calculation in IS 11255 (Part 1). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of flue gas sampled (meter) = 1.2 m³, average gas meter temperature (absolute) = 305 K, atmospheric pressure = 712 mmHg, average vacuum at the meter = 38 mmHg, initial weight of thimble = 4.152 g, final weight of thimble with dust = 4.203 g, the result is particulate matter = 49.0 mg/Nm³.

### What is a typical particulate matter (stack) value?

Typical limit for boilers: 150 mg/Nm³

### What mistakes should I look out for?

The thimble weighs less after sampling. The vacuum can't be more than atmospheric pressure.

### Is this particulate matter (stack) calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Carbon monoxide (stack) – Analyser (ppm to mg/m³ and g/kWh): Pollutants](https://novalims.in/tools/calculators/stack-co)
-   [Non-methane hydrocarbons – Analyser (ppm to mg/m³ and g/kWh): Pollutants](https://novalims.in/tools/calculators/stack-nmhc)
-   [Sulphur dioxide (stack) (Barium perchlorate titration): Pollutants](https://novalims.in/tools/calculators/stack-so2)

[All stack emissions calculators →](https://novalims.in/tools/calculators/stack)

Last reviewed 10 November 2026. Version 1. Follows IS 11255 (Part 1). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
