# Sulphite calculator (Iodometric) in mg/L | NovaLIMS

> Free sulphite calculator by the iodometric method (IS 3025 (Part 28)). Enter your readings to get sulphite as SO₃²⁻ in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/sulphite

## How sulphite is calculated

Free sulphite calculator (iodometric method), following IS 3025 (Part 28). Enter 4 readings to get sulphite as SO₃²⁻ in mg/L, with the formula filled in step by step.

1.  ### Sulphite as SO₃²⁻ · mg/L
    
    `SO₃²⁻ = (A − B) × N × 40000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| N | Normality of KI-KIO₃ | N | usually 0.005–0.1 N |
| B | KI-KIO₃ used for blank | ml | usually 0–2 ml |
| A | KI-KIO₃ used for sample | ml | usually 0–50 ml (a 50 ml burette) |

### Fixed values in the formula

| Symbol | Constant | Value |
| --- | --- | --- |
| 40000 | Equivalent weight of SO₃ × 1000 | 40000 |

## Worked example

Readings:

-   Volume of sample taken: **V = 50 ml**
-   Normality of KI-KIO₃: **N = 0.0125 N**
-   KI-KIO₃ used for blank: **B = 0.05 ml**
-   KI-KIO₃ used for sample: **A = 1.85 ml**

1.  ### Sulphite as SO₃²⁻
    
    `SO₃²⁻ = (1.85 − 0.05) × 0.0125 × 40000 / 50 = 18.00 mg/L`
    

Result: Sulphite as SO₃²⁻ **18.00 mg/L**.

## Checks and units

-   The sample titre (A) is less than the blank (B), so the result would be negative.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate sulphite by the iodometric method?

Sulphite as SO₃²⁻ = (A − B) × N × 40000 / V. Here V is the volume of sample taken (ml), N is the normality of KI-KIO₃ (N), B is the KI-KIO₃ used for blank (ml), A is the KI-KIO₃ used for sample (ml). The result is in mg/L.

### What unit is sulphite reported in?

Sulphite as SO₃²⁻ is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this sulphite calculation follow?

It follows the calculation in IS 3025 (Part 28). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 50 ml, normality of KI-KIO₃ = 0.0125 N, KI-KIO₃ used for blank = 0.05 ml, KI-KIO₃ used for sample = 1.85 ml, the result is sulphite as SO₃²⁻ = 18.00 mg/L.

### What mistakes should I look out for?

The sample titre (A) is less than the blank (B), so the result would be negative.

### Is this sulphite calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Anionic surfactants – Methylene blue active substances (MBAS): Organics & toxics](https://novalims.in/tools/calculators/anionic-surfactants)
-   [Cyanide (Colorimetric): Organics & toxics](https://novalims.in/tools/calculators/cyanide)
-   [Oil and grease (Partition-gravimetric): Organics & toxics](https://novalims.in/tools/calculators/oil-and-grease)
-   [Phenols – 4-Aminoantipyrine (chloroform extraction): Organics & toxics](https://novalims.in/tools/calculators/phenols)
-   [Sulphide (Methylene blue): Organics & toxics](https://novalims.in/tools/calculators/sulphide)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 28). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
