# Total dissolved solids calculator (Gravimetric) in mg/L | NovaLIMS

> Free total dissolved solids calculator by the gravimetric method (IS 3025 (Part 16)). Enter your readings to get total dissolved solids in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/total-dissolved-solids

## How total dissolved solids is calculated

Free total dissolved solids calculator (gravimetric method), following IS 3025 (Part 16). Enter 3 readings to get total dissolved solids in mg/L, with the formula filled in step by step.

1.  ### Total dissolved solids · mg/L
    
    `TDS = (W2 − W1) × 1000000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| W1 | Weight of empty dish (W1) | g | usually 0–200 g |
| W2 | Weight of dish with residue (W2) | g | usually 0–200 g |

## Worked example

Readings:

-   Volume of sample taken: **V = 50 ml**
-   Weight of empty dish (W1): **W1 = 48.2134 g**
-   Weight of dish with residue (W2): **W2 = 48.2361 g**

1.  ### Total dissolved solids
    
    `TDS = (48.2361 − 48.2134) × 1000000 / 50 = 454.0 mg/L`
    

Result: Total dissolved solids **454.0 mg/L**.

## Checks and units

-   **Typical values:** Most drinking water: up to 2,000 mg/L
-   The weight after (W2) is less than before (W1). Check the weighings.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate total dissolved solids by the gravimetric method?

Total dissolved solids = (W2 − W1) × 1000000 / V. Here V is the volume of sample taken (ml), W1 is the weight of empty dish (W1) (g), W2 is the weight of dish with residue (W2) (g). The result is in mg/L.

### What unit is total dissolved solids reported in?

Total dissolved solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this total dissolved solids calculation follow?

It follows the calculation in IS 3025 (Part 16). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 50 ml, weight of empty dish (W1) = 48.2134 g, weight of dish with residue (W2) = 48.2361 g, the result is total dissolved solids = 454.0 mg/L.

### What is a typical total dissolved solids value?

Most drinking water: up to 2,000 mg/L

### What mistakes should I look out for?

The weight after (W2) is less than before (W1). Check the weighings.

### Is this total dissolved solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Inorganic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/inorganic-solids)
-   [Organic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/organic-solids)
-   [Settleable solids (Calculation): Solids](https://novalims.in/tools/calculators/settleable-solids)
-   [Total solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-solids)
-   [Total suspended solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-suspended-solids)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 16). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
