# Total solids calculator (Gravimetric) in mg/L | NovaLIMS

> Free total solids calculator by the gravimetric method (IS 3025 (Part 15)). Enter your readings to get total residue in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/total-solids

## How total solids is calculated

Free total solids calculator (gravimetric method), following IS 3025 (Part 15). Enter 3 readings to get total residue in mg/L, with the formula filled in step by step.

1.  ### Total residue · mg/L
    
    `TS = (W2 − W1) × 1000 × 1000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| W1 | Mass of empty dish (W1) | g | usually 0–200 g |
| W2 | Mass of dish with residue (W2) | g | usually 0–200 g |

## Worked example

Readings:

-   Volume of sample taken: **V = 50 ml**
-   Mass of empty dish (W1): **W1 = 51.332 g**
-   Mass of dish with residue (W2): **W2 = 51.3602 g**

1.  ### Total residue
    
    `TS = (51.3602 − 51.332) × 1000 × 1000 / 50 = 564.0 mg/L`
    

Result: Total residue **564.0 mg/L**.

## Checks and units

-   The dish with residue (W2) weighs less than the empty dish (W1). Check the weighings.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate total solids by the gravimetric method?

Total residue = (W2 − W1) × 1000 × 1000 / V. Here V is the volume of sample taken (ml), W1 is the mass of empty dish (W1) (g), W2 is the mass of dish with residue (W2) (g). The result is in mg/L.

### What unit is total solids reported in?

Total residue is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this total solids calculation follow?

It follows the calculation in IS 3025 (Part 15). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 50 ml, mass of empty dish (W1) = 51.332 g, mass of dish with residue (W2) = 51.3602 g, the result is total residue = 564.0 mg/L.

### What mistakes should I look out for?

The dish with residue (W2) weighs less than the empty dish (W1). Check the weighings.

### Is this total solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Inorganic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/inorganic-solids)
-   [Organic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/organic-solids)
-   [Settleable solids (Calculation): Solids](https://novalims.in/tools/calculators/settleable-solids)
-   [Total dissolved solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-dissolved-solids)
-   [Total suspended solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-suspended-solids)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 15). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
