# Total suspended solids calculator (Gravimetric) in mg/L | NovaLIMS

> Free total suspended solids calculator by the gravimetric method (IS 3025 (Part 17)). Enter your readings to get total suspended solids in mg/L, with the formula, a worked example and typo checks.

Source: https://novalims.in/tools/calculators/total-suspended-solids

## How total suspended solids is calculated

Free total suspended solids calculator (gravimetric method), following IS 3025 (Part 17). Enter 3 readings to get total suspended solids in mg/L, with the formula filled in step by step.

1.  ### Total suspended solids · mg/L
    
    `TSS = (A − B) × 1000000 / V`
    

## What you need

| Symbol | Reading | Unit | Notes |
| --- | --- | --- | --- |
| V | Volume of sample taken | ml | usually 1–1000 ml |
| B | Weight of dish with filter, before | g | usually 0–200 g |
| A | Weight of dish with filter and residue, after drying | g | usually 0–200 g |

## Worked example

Readings:

-   Volume of sample taken: **V = 100 ml**
-   Weight of dish with filter, before: **B = 32.125 g**
-   Weight of dish with filter and residue, after drying: **A = 32.1312 g**

1.  ### Total suspended solids
    
    `TSS = (32.1312 − 32.125) × 1000000 / 100 = 62.0 mg/L`
    

Result: Total suspended solids **62.0 mg/L**.

## Checks and units

-   **Typical values:** Treated effluent: usually below 100 mg/L
-   The weight after drying (A) is less than before (B). Check the weighings.
-   **Other units:** ppm (1 mg/L ≈ 1 ppm in dilute water).

## Questions

### How do you calculate total suspended solids by the gravimetric method?

Total suspended solids = (A − B) × 1000000 / V. Here V is the volume of sample taken (ml), B is the weight of dish with filter, before (g), A is the weight of dish with filter and residue, after drying (g). The result is in mg/L.

### What unit is total suspended solids reported in?

Total suspended solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

### Which standard does this total suspended solids calculation follow?

It follows the calculation in IS 3025 (Part 17). Check it against the current edition of the standard and your lab’s SOP before reporting.

### Can you show a worked example?

With volume of sample taken = 100 ml, weight of dish with filter, before = 32.125 g, weight of dish with filter and residue, after drying = 32.1312 g, the result is total suspended solids = 62.0 mg/L.

### What is a typical total suspended solids value?

Treated effluent: usually below 100 mg/L

### What mistakes should I look out for?

The weight after drying (A) is less than before (B). Check the weighings.

### Is this total suspended solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

## Related calculators

-   [Inorganic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/inorganic-solids)
-   [Organic solids – Gravimetric (ignition): Solids](https://novalims.in/tools/calculators/organic-solids)
-   [Settleable solids (Calculation): Solids](https://novalims.in/tools/calculators/settleable-solids)
-   [Total dissolved solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-dissolved-solids)
-   [Total solids (Gravimetric): Solids](https://novalims.in/tools/calculators/total-solids)

[All water & waste water calculators →](https://novalims.in/tools/calculators/water)

Last reviewed 10 November 2026. Version 1. Follows IS 3025 (Part 17). [How we check our formulas](https://novalims.in/tools/calculators/methodology)

Check results against your own method and SOP before reporting. Found an error? [Tell us](mailto:hello@novalims.in?subject=Calculator%20check) and we’ll check it.

## Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.

[Book a Demo](https://novalims.in/contact) [Start Free Trial](https://novalims.in/contact?intent=trial)
