Skip to content
cfu

Yeast and mould count (swab)

Surface swabResult in cfu/cm²Lab SOP

Colonies from a surface swab

Formula
Ns =N×F×DA

Your readings

4 of 4 filled

Example values shown.

cfu/ml
ml
cm²
Yeast and mould count (swab)Calculated live as you type
46 cfu/cm²cfu/cm²
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How yeast and mould count (swab) is calculated

Free yeast and mould count (swab) calculator (surface swab method), following Lab SOP. Enter 4 readings to get yeast and mould count (swab) in cfu/cm², with the formula filled in step by step.

  1. Yeast and mould count (swab) · cfu/cm²

    Ns = N × F × D / A

What you need

SymbolReadingUnitNotes
NColonies per ml of the diluentcfu/mlusually 0–1000000 cfu/ml
FDiluent in the swab tubemlusually 1–100 ml
DReciprocal of the dilution used—usually 1–1000000
AArea swabbedcm²usually 1–10000 cm²; Enter 1 when the surface can't be measured.

Worked example

Readings:

  • Colonies per ml of the diluent: N = 46 cfu/ml
  • Diluent in the swab tube: F = 10 ml
  • Reciprocal of the dilution used: D = 10
  • Area swabbed: A = 100 cm²
  1. Yeast and mould count (swab)

    Ns = 46 × 10 × 10 / 100 = 46 cfu/cm²

Result: Yeast and mould count (swab) 46 cfu/cm².

Questions

How do you calculate yeast and mould count (swab) by the surface swab method?

Yeast and mould count (swab) = N × F × D / A. Here N is the colonies per ml of the diluent (cfu/ml), F is the diluent in the swab tube (ml), D is the reciprocal of the dilution used, A is the area swabbed (cm²). The result is in cfu/cm².

What unit is yeast and mould count (swab) reported in?

Yeast and mould count (swab) is reported in cfu/cm², to 2 significant figures.

Which standard does this yeast and mould count (swab) calculation follow?

It follows the calculation in Lab SOP. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With colonies per ml of the diluent = 46 cfu/ml, diluent in the swab tube = 10 ml, reciprocal of the dilution used = 10, area swabbed = 100 cm², the result is yeast and mould count (swab) = 46 cfu/cm².

Is this yeast and mould count (swab) calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All microbiology calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.