Skip to content
STABLEMLVSS

MLVSS

Gravimetric (ignition)Result in mg/LAPHA 2540 E

Weighed residue on a balance

Formula
MLVSS =(W2−W3)×1000000V

Your readings

3 of 3 filled

Example values shown.

ml
g
g
Mixed liquor volatile suspended solidsCalculated live as you type
2,248.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How MLVSS is calculated

Free MLVSS calculator (gravimetric (ignition) method), following APHA 2540 E. Enter 3 readings to get mixed liquor volatile suspended solids in mg/L, with the formula filled in step by step.

  1. Mixed liquor volatile suspended solids · mg/L

    MLVSS = (W2 − W3) × 1000000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
W3Weight of filter with residue after ignition (W3)gusually 0–200 g
W2Weight of filter with residue before ignition (W2)gusually 0–200 g

Worked example

Readings:

  • Volume of sample taken: V = 25 ml
  • Weight of filter with residue after ignition (W3): W3 = 0.131 g
  • Weight of filter with residue before ignition (W2): W2 = 0.1872 g
  1. Mixed liquor volatile suspended solids

    MLVSS = (0.1872 − 0.131) × 1000000 / 25 = 2,248.0 mg/L

Result: Mixed liquor volatile suspended solids 2,248.0 mg/L.

Checks and units

  • The weight after (W2) is less than before (W3). Check the weighings.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate MLVSS by the gravimetric (ignition) method?

Mixed liquor volatile suspended solids = (W2 − W3) × 1000000 / V. Here V is the volume of sample taken (ml), W3 is the weight of filter with residue after ignition (W3) (g), W2 is the weight of filter with residue before ignition (W2) (g). The result is in mg/L.

What unit is MLVSS reported in?

Mixed liquor volatile suspended solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this MLVSS calculation follow?

It follows the calculation in APHA 2540 E. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 25 ml, weight of filter with residue after ignition (W3) = 0.131 g, weight of filter with residue before ignition (W2) = 0.1872 g, the result is mixed liquor volatile suspended solids = 2,248.0 mg/L.

What mistakes should I look out for?

The weight after (W2) is less than before (W3). Check the weighings.

Is this MLVSS calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.