Skip to content
SVI

Sludge volume index

CalculationResult in ml/gAPHA 2710 D

Settled volume per gram of solids

Formula
SVI =SV×1000MLSS

Your readings

2 of 2 filled

Example values shown.

ml/L
mg/L
Sludge volume indexCalculated live as you type
94 ml/gml/g
Within the usual range. Good settling: about 50–150 ml/g.

Calculations you finish this week are counted here, on this device only.

How sludge volume index is calculated

Free sludge volume index calculator (calculation method), following APHA 2710 D. Enter 2 readings to get sludge volume index in ml/g, with the formula filled in step by step.

  1. Sludge volume index · ml/g

    SVI = SV × 1000 / MLSS

What you need

SymbolReadingUnitNotes
SVSettled sludge volume after 30 minutesml/Lusually 10–1000 ml/L
MLSSMixed liquor suspended solidsmg/Lusually 100–10000 mg/L

Worked example

Readings:

  • Settled sludge volume after 30 minutes: SV = 280 ml/L
  • Mixed liquor suspended solids: MLSS = 2990 mg/L
  1. Sludge volume index

    SVI = 280 × 1000 / 2990 = 94 ml/g

Result: Sludge volume index 94 ml/g.

Checks and units

  • Typical values: Good settling: about 50–150 ml/g

Questions

How do you calculate sludge volume index by the calculation method?

Sludge volume index = SV × 1000 / MLSS. Here SV is the settled sludge volume after 30 minutes (ml/L), MLSS is the mixed liquor suspended solids (mg/L). The result is in ml/g.

What unit is sludge volume index reported in?

Sludge volume index is reported in ml/g, to 0 decimal places.

Which standard does this sludge volume index calculation follow?

It follows the calculation in APHA 2710 D. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With settled sludge volume after 30 minutes = 280 ml/L, mixed liquor suspended solids = 2990 mg/L, the result is sludge volume index = 94 ml/g.

What is a typical sludge volume index value?

Good settling: about 50–150 ml/g

Is this sludge volume index calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.