Skip to content
RSC

Residual sodium carbonate

CalculationResult in meq/LIS 11624

Alkalinity minus hardness, in meq/L

Formula
RSC =ALK50−TH50

Your readings

2 of 2 filled

Example values shown.

mg/L
mg/L
Equivalent weight of CaCO₃Constant · fixed by the method50🔒
Residual sodium carbonateCalculated live as you type
0.96 meq/Lmeq/L
Within the usual range. Below 1.25 meq/L is safe for irrigation.

Calculations you finish this week are counted here, on this device only.

How residual sodium carbonate is calculated

Free residual sodium carbonate calculator (calculation method), following IS 11624. Enter 2 readings to get residual sodium carbonate in meq/L, with the formula filled in step by step.

  1. Residual sodium carbonate · meq/L

    RSC = ALK / 50 − TH / 50

What you need

SymbolReadingUnitNotes
ALKTotal alkalinity as CaCO₃mg/Lusually 0–1000 mg/L
THTotal hardness as CaCO₃mg/Lusually 0–2000 mg/L

Fixed values in the formula

SymbolConstantValue
50Equivalent weight of CaCO₃50

Worked example

Readings:

  • Total alkalinity as CaCO₃: ALK = 260 mg/L
  • Total hardness as CaCO₃: TH = 212 mg/L
  1. Residual sodium carbonate

    RSC = 260 / 50 − 212 / 50 = 0.96 meq/L

Result: Residual sodium carbonate 0.96 meq/L.

Checks and units

  • Typical values: Below 1.25 meq/L is safe for irrigation

Questions

How do you calculate residual sodium carbonate by the calculation method?

Residual sodium carbonate = ALK / 50 − TH / 50. Here ALK is the total alkalinity as CaCO₃ (mg/L), TH is the total hardness as CaCO₃ (mg/L). The result is in meq/L.

What unit is residual sodium carbonate reported in?

Residual sodium carbonate is reported in meq/L, to 2 decimal places.

Which standard does this residual sodium carbonate calculation follow?

It follows the calculation in IS 11624. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With total alkalinity as CaCO₃ = 260 mg/L, total hardness as CaCO₃ = 212 mg/L, the result is residual sodium carbonate = 0.96 meq/L.

What is a typical residual sodium carbonate value?

Below 1.25 meq/L is safe for irrigation

Is this residual sodium carbonate calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.