Skip to content
SAR

Sodium absorption ratio

CalculationResult in —IS 11624

Worked out from Na, Ca and Mg

Each ion is turned into meq/L with its equivalent weight first.

Formulas, in order
Sodium · meq/L
NaE =Na23
Calcium · meq/L
CaE =Ca20
Magnesium · meq/L
MgE =Mg12
Sodium absorption ratio
SAR =NaE√((CaE+MgE)2)

Your readings

3 of 3 filled

Example values shown.

mg/L
mg/L
mg/L
Equivalent weight of sodiumConstant · fixed by the method23🔒
Equivalent weight of calciumConstant · fixed by the method20🔒
Equivalent weight of magnesiumConstant · fixed by the method12🔒
Sodium absorption ratioCalculated live as you type
3.26
Within the usual range. Below 10 is low sodium hazard.

Calculations you finish this week are counted here, on this device only.

How sodium absorption ratio is calculated

Free sodium absorption ratio calculator (calculation method), following IS 11624. Enter 3 readings to get sodium absorption ratio, with the formula filled in step by step.

  1. Sodium · meq/L

    NaE = Na / 23

  2. Calcium · meq/L

    CaE = Ca / 20

  3. Magnesium · meq/L

    MgE = Mg / 12

  4. Sodium absorption ratio

    SAR = NaE / sqrt((CaE + MgE) / 2)

What you need

SymbolReadingUnitNotes
NaSodiummg/Lusually 0–2000 mg/L
CaCalciummg/Lusually 0–1000 mg/L
MgMagnesiummg/Lusually 0–1000 mg/L

Fixed values in the formula

SymbolConstantValue
23Equivalent weight of sodium23
20Equivalent weight of calcium20
12Equivalent weight of magnesium12

Worked example

Readings:

  • Sodium: Na = 115 mg/L
  • Calcium: Ca = 64 mg/L
  • Magnesium: Mg = 18 mg/L
  1. Sodium

    NaE = 115 / 23 = 5.000 meq/L

  2. Calcium

    CaE = 64 / 20 = 3.200 meq/L

  3. Magnesium

    MgE = 18 / 12 = 1.500 meq/L

  4. Sodium absorption ratio

    SAR = 5.000 / sqrt((3.200 + 1.500) / 2) = 3.26

Result: Sodium absorption ratio 3.26.

Checks and units

  • Typical values: Below 10 is low sodium hazard

Questions

How do you calculate sodium absorption ratio by the calculation method?

Work through 4 steps in order. Sodium: NaE = Na / 23. Calcium: CaE = Ca / 20. Magnesium: MgE = Mg / 12. Sodium absorption ratio: SAR = NaE / sqrt((CaE + MgE) / 2). Here Na is the sodium (mg/L), Ca is the calcium (mg/L), Mg is the magnesium (mg/L).

Which standard does this sodium absorption ratio calculation follow?

It follows the calculation in IS 11624. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With sodium = 115 mg/L, calcium = 64 mg/L, magnesium = 18 mg/L, the result is sodium absorption ratio = 3.26.

What is a typical sodium absorption ratio value?

Below 10 is low sodium hazard

Is this sodium absorption ratio calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.