Skip to content
H⁺

Acidity

TitrimetricResult in mg/LIS 3025 (Part 22)

Colourless → pink at pH 8.3 (phenolphthalein)

Formulas, in order
Mineral acidity (pH 3.7) as CaCO₃ · mg/L
AM =A×N×50×1000V
Total acidity (pH 8.3) as CaCO₃ · mg/L
AT =B×N×50×1000V

Your readings

4 of 4 filled

Example values shown.

ml
N
ml
ml
Equivalent weight of CaCO₃Constant · fixed by the method50🔒
Total acidity (pH 8.3) as CaCO₃Calculated live as you type
31.0 mg/L
  • Mineral acidity (pH 3.7) as CaCO₃0.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How acidity is calculated

Free acidity calculator (titrimetric method), following IS 3025 (Part 22). Enter 4 readings to get total acidity (pH 8.3) as CaCO₃ in mg/L, with the formula filled in step by step.

  1. Mineral acidity (pH 3.7) as CaCO₃ · mg/L

    AM = A × N × 50 × 1000 / V

  2. Total acidity (pH 8.3) as CaCO₃ · mg/L

    AT = B × N × 50 × 1000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
NNormality of NaOHNusually 0.005–0.1 N
ANaOH used to pH 3.7mlusually 0–50 ml
BNaOH used to pH 8.3mlusually 0–50 ml (a 50 ml burette)

Fixed values in the formula

SymbolConstantValue
50Equivalent weight of CaCO₃50

Worked example

Readings:

  • Volume of sample taken: V = 100 ml
  • Normality of NaOH: N = 0.02 N
  • NaOH used to pH 3.7: A = 0 ml
  • NaOH used to pH 8.3: B = 3.1 ml
  1. Mineral acidity (pH 3.7) as CaCO₃

    AM = 0 × 0.02 × 50 × 1000 / 100 = 0.0 mg/L

  2. Total acidity (pH 8.3) as CaCO₃

    AT = 3.1 × 0.02 × 50 × 1000 / 100 = 31.0 mg/L

Result: Mineral acidity (pH 3.7) as CaCO₃ 0.0 mg/L; total acidity (pH 8.3) as CaCO₃ 31.0 mg/L.

Checks and units

  • The titre to pH 8.3 (B) should be at least the titre to pH 3.7 (A).
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of CaCO₃: 50).

Questions

How do you calculate acidity by the titrimetric method?

Work through 2 steps in order. Mineral acidity (pH 3.7) as CaCO₃: AM = A × N × 50 × 1000 / V. Total acidity (pH 8.3) as CaCO₃: AT = B × N × 50 × 1000 / V. Here V is the volume of sample taken (ml), N is the normality of NaOH (N), A is the NaOH used to pH 3.7 (ml), B is the NaOH used to pH 8.3 (ml). The result is in mg/L.

What unit is acidity reported in?

Total acidity (pH 8.3) as CaCO₃ is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of CaCO₃: 50).

Which standard does this acidity calculation follow?

It follows the calculation in IS 3025 (Part 22). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 100 ml, normality of NaOH = 0.02 N, NaOH used to pH 3.7 = 0 ml, NaOH used to pH 8.3 = 3.1 ml, the result is mineral acidity (pH 3.7) as CaCO₃ = 0.0 mg/L and total acidity (pH 8.3) as CaCO₃ = 31.0 mg/L.

What mistakes should I look out for?

The titre to pH 8.3 (B) should be at least the titre to pH 3.7 (A).

Is this acidity calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.