Skip to content
CaCO₃

Alkalinity

Result in mg/LIS 3025 (Part 23)

Phenolphthalein pink fades at pH 8.3; methyl orange turns pink at the end

A is the acid used to reach pH 8.3; B is the further acid used from pH 8.3 to the total endpoint.

Formulas, in order
Phenolphthalein alkalinity as CaCO₃ · mg/L
P =A×N×50000V
Total alkalinity as CaCO₃ · mg/L
T =(A+B)×N×50000V
Total alkalinity as HCO₃⁻ · mg/L
THCO3 =(A+B)×N×50000×1.22V

Your readings

4 of 4 filled

Example values shown.

ml
N
ml
ml
Total alkalinity as CaCO₃Calculated live as you type
212.0 mg/L
  • Phenolphthalein alkalinity as CaCO₃8.0 mg/L
  • Total alkalinity as HCO₃⁻258.6 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How alkalinity is calculated

Free alkalinity calculator (titrimetric (phenolphthalein and total) method), following IS 3025 (Part 23). Enter 4 readings to get total alkalinity as CaCO₃ in mg/L, with the formula filled in step by step.

  1. Phenolphthalein alkalinity as CaCO₃ · mg/L

    P = A × N × 50000 / V

  2. Total alkalinity as CaCO₃ · mg/L

    T = (A + B) × N × 50000 / V

  3. Total alkalinity as HCO₃⁻ · mg/L

    THCO3 = (A + B) × N × 50000 × 1.22 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
NNormality of H₂SO₄Nusually 0.005–0.1 N
AH₂SO₄ used to pH 8.3mlusually 0–50 ml
BH₂SO₄ used from pH 8.3 to the total endpointmlusually 0–50 ml (a 50 ml burette)

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Normality of H₂SO₄: N = 0.02 N
  • H₂SO₄ used to pH 8.3: A = 0.4 ml
  • H₂SO₄ used from pH 8.3 to the total endpoint: B = 10.2 ml
  1. Phenolphthalein alkalinity as CaCO₃

    P = 0.4 × 0.02 × 50000 / 50 = 8.0 mg/L

  2. Total alkalinity as CaCO₃

    T = (0.4 + 10.2) × 0.02 × 50000 / 50 = 212.0 mg/L

  3. Total alkalinity as HCO₃⁻

    THCO3 = (0.4 + 10.2) × 0.02 × 50000 × 1.22 / 50 = 258.6 mg/L

Result: Phenolphthalein alkalinity as CaCO₃ 8.0 mg/L; total alkalinity as CaCO₃ 212.0 mg/L; total alkalinity as HCO₃⁻ 258.6 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of CaCO₃: 50).

Questions

How do you calculate alkalinity by the titrimetric (phenolphthalein and total) method?

Work through 3 steps in order. Phenolphthalein alkalinity as CaCO₃: P = A × N × 50000 / V. Total alkalinity as CaCO₃: T = (A + B) × N × 50000 / V. Total alkalinity as HCO₃⁻: THCO3 = (A + B) × N × 50000 × 1.22 / V. Here V is the volume of sample taken (ml), N is the normality of H₂SO₄ (N), A is the H₂SO₄ used to pH 8.3 (ml), B is the H₂SO₄ used from pH 8.3 to the total endpoint (ml). The result is in mg/L.

What unit is alkalinity reported in?

Total alkalinity as CaCO₃ is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of CaCO₃: 50).

Which standard does this alkalinity calculation follow?

It follows the calculation in IS 3025 (Part 23). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, normality of H₂SO₄ = 0.02 N, H₂SO₄ used to pH 8.3 = 0.4 ml, H₂SO₄ used from pH 8.3 to the total endpoint = 10.2 ml, the result is phenolphthalein alkalinity as CaCO₃ = 8.0 mg/L and total alkalinity as CaCO₃ = 212.0 mg/L and total alkalinity as HCO₃⁻ = 258.6 mg/L.

Is this alkalinity calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.