Skip to content
CO₃²⁻

Carbonate and bicarbonate

Calculation from alkalinityResult in mg/LIS 3025 (Part 51)

Worked out from P and T alkalinity

From phenolphthalein (P) and total (T) alkalinity, using the standard P-versus-T rules.

Formulas, in order
Carbonate as CaCO₃ · mg/L
CO₃²⁻ =if(P=0,0,if(P<T2,2×P,if(P=T2,2×P,if(P<T,2×(T−P),0))))
Bicarbonate as CaCO₃ · mg/L
HCO₃⁻ =if(P=0,T,if(P<T2,T−2×P,0))

Your readings

2 of 2 filled

Example values shown.

mg/L
mg/L
Bicarbonate as CaCO₃Calculated live as you type
90.0 mg/Lmg/L
  • Carbonate as CaCO₃16.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How carbonate and bicarbonate is calculated

Free carbonate and bicarbonate calculator (calculation from alkalinity method), following IS 3025 (Part 51). Enter 2 readings to get bicarbonate as CaCO₃ in mg/L, with the formula filled in step by step.

  1. Carbonate as CaCO₃ · mg/L

    CO₃²⁻ = if(P = 0, 0, if(P < T / 2, 2 × P, if(P = T / 2, 2 × P, if(P < T, 2 × (T − P), 0))))

  2. Bicarbonate as CaCO₃ · mg/L

    HCO₃⁻ = if(P = 0, T, if(P < T / 2, T − 2 × P, 0))

What you need

SymbolReadingUnitNotes
PPhenolphthalein alkalinity as CaCO₃mg/Lusually 0–1000 mg/L
TTotal alkalinity as CaCO₃mg/Lusually 0–1000 mg/L

Worked example

Readings:

  • Phenolphthalein alkalinity as CaCO₃: P = 8 mg/L
  • Total alkalinity as CaCO₃: T = 106 mg/L
  1. Carbonate as CaCO₃

    CO₃²⁻ = if(8 = 0, 0, if(8 < 106 / 2, 2 × 8, if(8 = 106 / 2, 2 × 8, if(8 < 106, 2 × (106 − 8), 0)))) = 16.0 mg/L

  2. Bicarbonate as CaCO₃

    HCO₃⁻ = if(8 = 0, 106, if(8 < 106 / 2, 106 − 2 × 8, 0)) = 90.0 mg/L

Result: Carbonate as CaCO₃ 16.0 mg/L; bicarbonate as CaCO₃ 90.0 mg/L.

Checks and units

  • Phenolphthalein alkalinity (P) can't be more than total alkalinity (T).

Questions

How do you calculate carbonate and bicarbonate by the calculation from alkalinity method?

Work through 2 steps in order. Carbonate as CaCO₃: CO₃²⁻ = if(P = 0, 0, if(P < T / 2, 2 × P, if(P = T / 2, 2 × P, if(P < T, 2 × (T − P), 0)))). Bicarbonate as CaCO₃: HCO₃⁻ = if(P = 0, T, if(P < T / 2, T − 2 × P, 0)). Here P is the phenolphthalein alkalinity as CaCO₃ (mg/L), T is the total alkalinity as CaCO₃ (mg/L). The result is in mg/L.

What unit is carbonate and bicarbonate reported in?

Bicarbonate as CaCO₃ is reported in mg/L, to 1 decimal place.

Which standard does this carbonate and bicarbonate calculation follow?

It follows the calculation in IS 3025 (Part 51). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With phenolphthalein alkalinity as CaCO₃ = 8 mg/L, total alkalinity as CaCO₃ = 106 mg/L, the result is carbonate as CaCO₃ = 16.0 mg/L and bicarbonate as CaCO₃ = 90.0 mg/L.

What mistakes should I look out for?

Phenolphthalein alkalinity (P) can't be more than total alkalinity (T).

Is this carbonate and bicarbonate calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.