Skip to content
515 nmCl₂

Chloramines

DPD colorimetricResult in mg/LIS 3025 (Part 26)

Turns pink · read at 515 nm

Formula
Cl₂ =A×F×D

Your readings

4 of 4 filled

Example values shown.

ml
Abs
mg/L per Abs
Chloramines as Cl₂Calculated live as you type
0.583 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How chloramines is calculated

Free chloramines calculator (DPD colorimetric method), following IS 3025 (Part 26). Enter 4 readings to get chloramines as Cl₂ in mg/L, with the formula filled in step by step.

  1. Chloramines as Cl₂ · mg/L

    Cl₂ = A × F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
FFactormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 10 ml
  • Absorbance of sample: A = 0.162 Abs
  • Factor: F = 3.6 mg/L per Abs
  • Dilution factor: D = 1
  1. Chloramines as Cl₂

    Cl₂ = 0.162 × 3.6 × 1 = 0.583 mg/L

Result: Chloramines as Cl₂ 0.583 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate chloramines by the DPD colorimetric method?

Chloramines as Cl₂ = A × F × D. Here V is the volume of sample taken (ml), A is the absorbance of sample (Abs), F is the factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is chloramines reported in?

Chloramines as Cl₂ is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this chloramines calculation follow?

It follows the calculation in IS 3025 (Part 26). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 10 ml, absorbance of sample = 0.162 Abs, factor = 3.6 mg/L per Abs, dilution factor = 1, the result is chloramines as Cl₂ = 0.583 mg/L.

Is this chloramines calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.