Skip to content
Cl₂

Residual free chlorine

IodometricResult in mg/LIS 3025 (Part 26)

Blue → colourless at the endpoint (starch)

Formula
Cl₂ =A×N×35.45×1000V

Your readings

3 of 3 filled

Example values shown.

ml
N
ml
Atomic weight of chlorineConstant · fixed by the method35.45🔒
Residual free chlorine as Cl₂Calculated live as you type
2.13 mg/L
Within the usual range. Drinking water: at least 0.2 mg/L.

Calculations you finish this week are counted here, on this device only.

How residual free chlorine is calculated

Free residual free chlorine calculator (iodometric method), following IS 3025 (Part 26). Enter 3 readings to get residual free chlorine as Cl₂ in mg/L, with the formula filled in step by step.

  1. Residual free chlorine as Cl₂ · mg/L

    Cl₂ = A × N × 35.45 × 1000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
NNormality of Na₂S₂O₃Nusually 0.001–0.1 N
ANa₂S₂O₃ usedmlusually 0–50 ml (a 50 ml burette)

Fixed values in the formula

SymbolConstantValue
35.45Atomic weight of chlorine35.45

Worked example

Readings:

  • Volume of sample taken: V = 200 ml
  • Normality of Na₂S₂O₃: N = 0.01 N
  • Na₂S₂O₃ used: A = 1.2 ml
  1. Residual free chlorine as Cl₂

    Cl₂ = 1.2 × 0.01 × 35.45 × 1000 / 200 = 2.13 mg/L

Result: Residual free chlorine as Cl₂ 2.13 mg/L.

Checks and units

  • Typical values: Drinking water: at least 0.2 mg/L
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate residual free chlorine by the iodometric method?

Residual free chlorine as Cl₂ = A × N × 35.45 × 1000 / V. Here V is the volume of sample taken (ml), N is the normality of Na₂S₂O₃ (N), A is the Na₂S₂O₃ used (ml). The result is in mg/L.

What unit is residual free chlorine reported in?

Residual free chlorine as Cl₂ is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this residual free chlorine calculation follow?

It follows the calculation in IS 3025 (Part 26). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 200 ml, normality of Na₂S₂O₃ = 0.01 N, Na₂S₂O₃ used = 1.2 ml, the result is residual free chlorine as Cl₂ = 2.13 mg/L.

What is a typical residual free chlorine value?

Drinking water: at least 0.2 mg/L

Is this residual free chlorine calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.