Skip to content
Cl₂

Total chlorine

DPD titrimetricResult in mg/LIS 3025 (Part 26)ISO 7393-1

Pink (DPD) → colourless at the endpoint

Formulas, in order
Total chlorine · mmol/L
c =c₃×(V₄−V₅)V₀
Total chlorine as Cl₂ · mg/L
Cl₂ =c×70.91

Your readings

4 of 4 filled

Example values shown.

ml
mmol/L
ml
ml
Molar mass of Cl₂Constant · fixed by the method70.91g/mol
Total chlorine as Cl₂Calculated live as you type
1.49 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How total chlorine is calculated

Free total chlorine calculator (DPD titrimetric method), following IS 3025 (Part 26), ISO 7393-1. Enter 4 readings to get total chlorine as Cl₂ in mg/L, with the formula filled in step by step.

  1. Total chlorine · mmol/L

    c = c₃ × (V₄ − V₅) / V₀

  2. Total chlorine as Cl₂ · mg/L

    Cl₂ = c × 70.91

What you need

SymbolReadingUnitNotes
V₀Volume of test samplemlusually 10–200 ml
c₃Concentration of the FAS solution, as Cl₂mmol/Lusually 0.1–5 mmol/L
V₄FAS solution used in the titrationmlusually 0–50 ml (a 50 ml burette)
V₅FAS solution used for oxidised manganese (0 if none)mlusually 0–5 ml

Fixed values in the formula

SymbolConstantValue
70.91Molar mass of Cl₂70.91 g/mol

Worked example

Readings:

  • Volume of test sample: V₀ = 100 ml
  • Concentration of the FAS solution, as Cl₂: c₃ = 0.5 mmol/L
  • FAS solution used in the titration: V₄ = 4.2 ml
  • FAS solution used for oxidised manganese (0 if none): V₅ = 0 ml
  1. Total chlorine

    c = 0.5 × (4.2 − 0) / 100 = 0.0210 mmol/L

  2. Total chlorine as Cl₂

    Cl₂ = 0.0210 × 70.91 = 1.49 mg/L

Result: Total chlorine as Cl₂ 1.49 mg/L.

Checks and units

  • The manganese correction (V₅) can't be more than the titration (V₄).
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate total chlorine by the DPD titrimetric method?

Work through 2 steps in order. Total chlorine: c = c₃ × (V₄ − V₅) / V₀. Total chlorine as Cl₂: Cl₂ = c × 70.91. Here V₀ is the volume of test sample (ml), c₃ is the concentration of the FAS solution, as Cl₂ (mmol/L), V₄ is the FAS solution used in the titration (ml), V₅ is the FAS solution used for oxidised manganese (0 if none) (ml). The result is in mg/L.

What unit is total chlorine reported in?

Total chlorine as Cl₂ is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this total chlorine calculation follow?

It follows the calculation in IS 3025 (Part 26), ISO 7393-1. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of test sample = 100 ml, concentration of the FAS solution, as Cl₂ = 0.5 mmol/L, FAS solution used in the titration = 4.2 ml, FAS solution used for oxidised manganese (0 if none) = 0 ml, the result is total chlorine as Cl₂ = 1.49 mg/L.

What mistakes should I look out for?

The manganese correction (V₅) can't be more than the titration (V₄).

Is this total chlorine calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.