How PM10 is calculated
Free PM10 calculator (gravimetric (by shift) method), following IS 5182 (Part 23). Enter 3 readings to get average PM10 in µg/m³, with the formula filled in step by step.
PM10 for the shift · µg/m³ · for each shift
PM = (W2 − W1) × 1000000 / Vol
Average PM10 · µg/m³
PMavg = avg(PM)
What you need
| Symbol | Reading | Unit | Notes |
|---|---|---|---|
| Vol | Volume of air sampled | m³ | one per shift; usually 0.5–2000 m³ |
| W1 | Weight of filter paper | g | one per shift; usually 0–200 g |
| W2 | Weight of filter paper with dust | g | one per shift; usually 0–200 g |
Worked example
Readings:
- Volume of air sampled: Vol = 960, 955.2, 958.1 m³
- Weight of filter paper: W1 = 3.118, 3.112, 3.115 g
- Weight of filter paper with dust: W2 = 3.214, 3.205, 3.22 g
PM10 for the shift
PM = 100.0, 97.4, 109.6 µg/m³
Average PM10
PMavg = avg(100.0, 97.4, 109.6) = 102.3 µg/m³
Result: Average PM10 102.3 µg/m³.
Checks and units
- Typical values: 24-hour standard (NAAQS): 100 µg/m³
- Weights can't be negative.
Questions
How do you calculate PM10 by the gravimetric (by shift) method?
Work through 2 steps in order. PM10 for the shift: PM = (W2 − W1) × 1000000 / Vol. Average PM10: PMavg = avg(PM). The result is in µg/m³.
What unit is PM10 reported in?
Average PM10 is reported in µg/m³, to 1 decimal place.
Which standard does this PM10 calculation follow?
It follows the calculation in IS 5182 (Part 23). Check it against the current edition of the standard and your lab’s SOP before reporting.
Can you show a worked example?
With volume of air sampled = 960, 955.2, 958.1 m³, weight of filter paper = 3.118, 3.112, 3.115 g, weight of filter paper with dust = 3.214, 3.205, 3.22 g, the result is average PM10 = 102.3 µg/m³.
What is a typical PM10 value?
24-hour standard (NAAQS): 100 µg/m³
What mistakes should I look out for?
Weights can't be negative.
Is this PM10 calculator free?
Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.
Related calculators
Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.