Skip to content
SPM

Suspended particulate matter

CalculationResult in µg/m³IS 5182 (Part 4)

PM10 plus the coarse fraction

PM2.5 is part of PM10, so it isn't added again.

Formula
SPM =PM10+NRSPM

Your readings

2 of 2 filled

Example values shown.

µg/m³
µg/m³
Suspended particulate matterCalculated live as you type
167.1 µg/m³µg/m³
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How suspended particulate matter is calculated

Free suspended particulate matter calculator (calculation method), following IS 5182 (Part 4). Enter 2 readings to get suspended particulate matter in µg/m³, with the formula filled in step by step.

  1. Suspended particulate matter · µg/m³

    SPM = PM10 + NRSPM

What you need

SymbolReadingUnitNotes
PM10Average PM10µg/m³usually 0–1000 µg/m³
NRSPMAverage NRSPMµg/m³usually 0–1000 µg/m³

Worked example

Readings:

  • Average PM10: PM10 = 102.3 µg/m³
  • Average NRSPM: NRSPM = 64.8 µg/m³
  1. Suspended particulate matter

    SPM = 102.3 + 64.8 = 167.1 µg/m³

Result: Suspended particulate matter 167.1 µg/m³.

Questions

How do you calculate suspended particulate matter by the calculation method?

Suspended particulate matter = PM10 + NRSPM. Here PM10 is the average PM10 (µg/m³), NRSPM is the average NRSPM (µg/m³). The result is in µg/m³.

What unit is suspended particulate matter reported in?

Suspended particulate matter is reported in µg/m³, to 1 decimal place.

Which standard does this suspended particulate matter calculation follow?

It follows the calculation in IS 5182 (Part 4). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With average PM10 = 102.3 µg/m³, average NRSPM = 64.8 µg/m³, the result is suspended particulate matter = 167.1 µg/m³.

Is this suspended particulate matter calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All ambient air calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.