Skip to content
100%PM2.5

PM2.5

GravimetricResult in µg/m³IS 5182 (Part 24)

Dust collected on a filter, weighed

Formula
PM25 =(W2−W1)×1000000Vol

Your readings

3 of 3 filled

Example values shown.

m³
g
g
PM2.5Calculated live as you type
45.0 µg/m³µg/m³
Within the usual range. 24-hour standard (NAAQS): 60 µg/m³.

Calculations you finish this week are counted here, on this device only.

How PM2.5 is calculated

Free PM2.5 calculator (gravimetric method), following IS 5182 (Part 24). Enter 3 readings to get PM2.5 in µg/m³, with the formula filled in step by step.

  1. PM2.5 · µg/m³

    PM25 = (W2 − W1) × 1000000 / Vol

What you need

SymbolReadingUnitNotes
VolVolume of air sampledm³usually 0.5–50 m³
W1Weight of filter papergusually 0–5 g
W2Weight of filter paper with dustgusually 0–5 g

Worked example

Readings:

  • Volume of air sampled: Vol = 24 m³
  • Weight of filter paper: W1 = 0.1452 g
  • Weight of filter paper with dust: W2 = 0.14628 g
  1. PM2.5

    PM25 = (0.14628 − 0.1452) × 1000000 / 24 = 45.0 µg/m³

Result: PM2.5 45.0 µg/m³.

Checks and units

  • Typical values: 24-hour standard (NAAQS): 60 µg/m³
  • The filter with dust (W2) weighs less than the clean filter (W1).

Questions

How do you calculate PM2.5 by the gravimetric method?

PM2.5 = (W2 − W1) × 1000000 / Vol. Here Vol is the volume of air sampled (m³), W1 is the weight of filter paper (g), W2 is the weight of filter paper with dust (g). The result is in µg/m³.

What unit is PM2.5 reported in?

PM2.5 is reported in µg/m³, to 1 decimal place.

Which standard does this PM2.5 calculation follow?

It follows the calculation in IS 5182 (Part 24). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of air sampled = 24 m³, weight of filter paper = 0.1452 g, weight of filter paper with dust = 0.14628 g, the result is PM2.5 = 45.0 µg/m³.

What is a typical PM2.5 value?

24-hour standard (NAAQS): 60 µg/m³

What mistakes should I look out for?

The filter with dust (W2) weighs less than the clean filter (W1).

Is this PM2.5 calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All ambient air calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.