Skip to content
410 nmNH₃

Ammonia

NesslerisationResult in mg/LIS 3025 (Part 34)

Turns yellow-brown · read at 410 nm

Formula
NH₃ =A×F×D

Your readings

4 of 4 filled

Example values shown.

ml
Abs
mg/L per Abs
AmmoniaCalculated live as you type
0.398 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How ammonia is calculated

Free ammonia calculator (nesslerisation method), following IS 3025 (Part 34). Enter 4 readings to get ammonia in mg/L, with the formula filled in step by step.

  1. Ammonia · mg/L

    NH₃ = A × F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
FFactormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Absorbance of sample: A = 0.142 Abs
  • Factor: F = 2.8 mg/L per Abs
  • Dilution factor: D = 1
  1. Ammonia

    NH₃ = 0.142 × 2.8 × 1 = 0.398 mg/L

Result: Ammonia 0.398 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate ammonia by the nesslerisation method?

Ammonia = A × F × D. Here V is the volume of sample taken (ml), A is the absorbance of sample (Abs), F is the factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is ammonia reported in?

Ammonia is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this ammonia calculation follow?

It follows the calculation in IS 3025 (Part 34). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, absorbance of sample = 0.142 Abs, factor = 2.8 mg/L per Abs, dilution factor = 1, the result is ammonia = 0.398 mg/L.

Is this ammonia calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.