Skip to content
N

Ammonical nitrogen

Titrimetric (Kjeldahl distillation)Result in mg/LIS 3025 (Part 34)

Green → pink at the endpoint (mixed indicator)

Formula
NH3N =(A−B)×N×14×1000V

Your readings

4 of 4 filled

Example values shown.

ml
N
ml
ml
Atomic weight of nitrogenConstant · fixed by the method14🔒
Ammonical nitrogen as NH₃-NCalculated live as you type
11.76 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How ammonical nitrogen is calculated

Free ammonical nitrogen calculator (titrimetric (Kjeldahl distillation) method), following IS 3025 (Part 34). Enter 4 readings to get ammonical nitrogen as NH₃-N in mg/L, with the formula filled in step by step.

  1. Ammonical nitrogen as NH₃-N · mg/L

    NH3N = (A − B) × N × 14 × 1000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
NNormality of H₂SO₄Nusually 0.005–0.1 N
BH₂SO₄ used for blankmlusually 0–2 ml
AH₂SO₄ used for samplemlusually 0–50 ml (a 50 ml burette)

Fixed values in the formula

SymbolConstantValue
14Atomic weight of nitrogen14

Worked example

Readings:

  • Volume of sample taken: V = 100 ml
  • Normality of H₂SO₄: N = 0.02 N
  • H₂SO₄ used for blank: B = 0.1 ml
  • H₂SO₄ used for sample: A = 4.3 ml
  1. Ammonical nitrogen as NH₃-N

    NH3N = (4.3 − 0.1) × 0.02 × 14 × 1000 / 100 = 11.76 mg/L

Result: Ammonical nitrogen as NH₃-N 11.76 mg/L.

Checks and units

  • The sample titre (A) is less than the blank (B), so the result would be negative.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate ammonical nitrogen by the titrimetric (Kjeldahl distillation) method?

Ammonical nitrogen as NH₃-N = (A − B) × N × 14 × 1000 / V. Here V is the volume of sample taken (ml), N is the normality of H₂SO₄ (N), B is the H₂SO₄ used for blank (ml), A is the H₂SO₄ used for sample (ml). The result is in mg/L.

What unit is ammonical nitrogen reported in?

Ammonical nitrogen as NH₃-N is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this ammonical nitrogen calculation follow?

It follows the calculation in IS 3025 (Part 34). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 100 ml, normality of H₂SO₄ = 0.02 N, H₂SO₄ used for blank = 0.1 ml, H₂SO₄ used for sample = 4.3 ml, the result is ammonical nitrogen as NH₃-N = 11.76 mg/L.

What mistakes should I look out for?

The sample titre (A) is less than the blank (B), so the result would be negative.

Is this ammonical nitrogen calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.