Skip to content
220 nm / 410 nmNO₃-N

Nitrate nitrogen

UV screening / chromotropic acidResult in mg/LIS 3025 (Part 34)

Read at 220 nm (UV) or 410 nm (chromotropic acid, yellow)

Formula
NO₃-N =(A−B)×G.F×D

Your readings

5 of 5 filled

Example values shown.

ml
Abs
Abs
mg/L per Abs
Nitrate nitrogen as NO₃-NCalculated live as you type
1.008 mg/L
Within the usual range. Drinking water: up to 10 mg/L as N.

Calculations you finish this week are counted here, on this device only.

How nitrate nitrogen is calculated

Free nitrate nitrogen calculator (UV screening / chromotropic acid method), following IS 3025 (Part 34). Enter 5 readings to get nitrate nitrogen as NO₃-N in mg/L, with the formula filled in step by step.

  1. Nitrate nitrogen as NO₃-N · mg/L

    NO₃-N = (A − B) × G.F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
BAbsorbance of blankAbsusually 0–0.2 Abs
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
G.FGraph factormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Absorbance of blank: B = 0.005 Abs
  • Absorbance of sample: A = 0.245 Abs
  • Graph factor: G.F = 4.2 mg/L per Abs
  • Dilution factor: D = 1
  1. Nitrate nitrogen as NO₃-N

    NO₃-N = (0.245 − 0.005) × 4.2 × 1 = 1.008 mg/L

Result: Nitrate nitrogen as NO₃-N 1.008 mg/L.

Checks and units

  • Typical values: Drinking water: up to 10 mg/L as N
  • The sample reading (A) is lower than the blank (B), so the result would be negative. Check both.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate nitrate nitrogen by the UV screening / chromotropic acid method?

Nitrate nitrogen as NO₃-N = (A − B) × G.F × D. Here V is the volume of sample taken (ml), B is the absorbance of blank (Abs), A is the absorbance of sample (Abs), G.F is the graph factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is nitrate nitrogen reported in?

Nitrate nitrogen as NO₃-N is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this nitrate nitrogen calculation follow?

It follows the calculation in IS 3025 (Part 34). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, absorbance of blank = 0.005 Abs, absorbance of sample = 0.245 Abs, graph factor = 4.2 mg/L per Abs, dilution factor = 1, the result is nitrate nitrogen as NO₃-N = 1.008 mg/L.

What is a typical nitrate nitrogen value?

Drinking water: up to 10 mg/L as N

What mistakes should I look out for?

The sample reading (A) is lower than the blank (B), so the result would be negative. Check both.

Is this nitrate nitrogen calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.