Skip to content
410 nmB

Borates

Azomethine-HResult in mg/LIS 3025 (Part 57)

Turns yellow · read at 410 nm

Formula
B =A×F×D

Your readings

4 of 4 filled

Example values shown.

ml
Abs
mg/L per Abs
Borates as BCalculated live as you type
0.653 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How borates is calculated

Free borates calculator (Azomethine-H method), following IS 3025 (Part 57). Enter 4 readings to get borates as B in mg/L, with the formula filled in step by step.

  1. Borates as B · mg/L

    B = A × F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
FFactormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Absorbance of sample: A = 0.192 Abs
  • Factor: F = 3.4 mg/L per Abs
  • Dilution factor: D = 1
  1. Borates as B

    B = 0.192 × 3.4 × 1 = 0.653 mg/L

Result: Borates as B 0.653 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate borates by the Azomethine-H method?

Borates as B = A × F × D. Here V is the volume of sample taken (ml), A is the absorbance of sample (Abs), F is the factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is borates reported in?

Borates as B is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this borates calculation follow?

It follows the calculation in IS 3025 (Part 57). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, absorbance of sample = 0.192 Abs, factor = 3.4 mg/L per Abs, dilution factor = 1, the result is borates as B = 0.653 mg/L.

Is this borates calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.