Skip to content
540 nmB

Boron

CurcuminResult in mg/LIS 3025 (Part 57)

Turns red · read at 540 nm

Formula
B =A₂×C(A₁×S)

Your readings

4 of 4 filled

Example values shown.

Abs
Abs
µg
ml
Boron as BCalculated live as you type
1.000 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How boron is calculated

Free boron calculator (curcumin method), following IS 3025 (Part 57). Enter 4 readings to get boron as B in mg/L, with the formula filled in step by step.

  1. Boron as B · mg/L

    B = A₂ × C / (A₁ × S)

What you need

SymbolReadingUnitNotes
A₁Absorbance of standardAbsusually 0–2 Abs (the usual 0–2 absorbance range)
A₂Absorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
CBoron in the standard takenµgusually 0.1–10 µg
SVolume of sample takenmlusually 0.5–10 ml

Worked example

Readings:

  • Absorbance of standard: A₁ = 0.42 Abs
  • Absorbance of sample: A₂ = 0.21 Abs
  • Boron in the standard taken: C = 2 µg
  • Volume of sample taken: S = 1 ml
  1. Boron as B

    B = 0.21 × 2 / (0.42 × 1) = 1.000 mg/L

Result: Boron as B 1.000 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate boron by the curcumin method?

Boron as B = A₂ × C / (A₁ × S). Here A₁ is the absorbance of standard (Abs), A₂ is the absorbance of sample (Abs), C is the boron in the standard taken (µg), S is the volume of sample taken (ml). The result is in mg/L.

What unit is boron reported in?

Boron as B is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this boron calculation follow?

It follows the calculation in IS 3025 (Part 57). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With absorbance of standard = 0.42 Abs, absorbance of sample = 0.21 Abs, boron in the standard taken = 2 µg, volume of sample taken = 1 ml, the result is boron as B = 1.000 mg/L.

Is this boron calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.