Skip to content
540 nmCr⁶⁺

Hexavalent chromium

DiphenylcarbazideResult in mg/LIS 3025 (Part 52)

Turns red-violet · read at 540 nm

Formula
Cr⁶⁺ =A×F×D

Your readings

4 of 4 filled

Example values shown.

ml
Abs
mg/L per Abs
Hexavalent chromium as Cr⁶⁺Calculated live as you type
0.036 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How hexavalent chromium is calculated

Free hexavalent chromium calculator (diphenylcarbazide method), following IS 3025 (Part 52). Enter 4 readings to get hexavalent chromium as Cr⁶⁺ in mg/L, with the formula filled in step by step.

  1. Hexavalent chromium as Cr⁶⁺ · mg/L

    Cr⁶⁺ = A × F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
FFactormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Absorbance of sample: A = 0.058 Abs
  • Factor: F = 0.62 mg/L per Abs
  • Dilution factor: D = 1
  1. Hexavalent chromium as Cr⁶⁺

    Cr⁶⁺ = 0.058 × 0.62 × 1 = 0.036 mg/L

Result: Hexavalent chromium as Cr⁶⁺ 0.036 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate hexavalent chromium by the diphenylcarbazide method?

Hexavalent chromium as Cr⁶⁺ = A × F × D. Here V is the volume of sample taken (ml), A is the absorbance of sample (Abs), F is the factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is hexavalent chromium reported in?

Hexavalent chromium as Cr⁶⁺ is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this hexavalent chromium calculation follow?

It follows the calculation in IS 3025 (Part 52). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, absorbance of sample = 0.058 Abs, factor = 0.62 mg/L per Abs, dilution factor = 1, the result is hexavalent chromium as Cr⁶⁺ = 0.036 mg/L.

Is this hexavalent chromium calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.