Skip to content
STABLEIS

Inorganic solids

Gravimetric (ignition)Result in mg/LIS 3025 (Part 18)

Weighed residue on a balance

Formula
IS =(W3−W1)×1000000V

Your readings

3 of 3 filled

Example values shown.

ml
g
g
Inorganic (fixed) solidsCalculated live as you type
288.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How inorganic solids is calculated

Free inorganic solids calculator (gravimetric (ignition) method), following IS 3025 (Part 18). Enter 3 readings to get inorganic (fixed) solids in mg/L, with the formula filled in step by step.

  1. Inorganic (fixed) solids · mg/L

    IS = (W3 − W1) × 1000000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
W1Weight of empty dish (W1)gusually 0–200 g
W3Weight of dish with residue after ignition (W3)gusually 0–200 g

Worked example

Readings:

  • Volume of sample taken: V = 100 ml
  • Weight of empty dish (W1): W1 = 45.12 g
  • Weight of dish with residue after ignition (W3): W3 = 45.1488 g
  1. Inorganic (fixed) solids

    IS = (45.1488 − 45.12) × 1000000 / 100 = 288.0 mg/L

Result: Inorganic (fixed) solids 288.0 mg/L.

Checks and units

  • The weight after (W3) is less than before (W1). Check the weighings.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate inorganic solids by the gravimetric (ignition) method?

Inorganic (fixed) solids = (W3 − W1) × 1000000 / V. Here V is the volume of sample taken (ml), W1 is the weight of empty dish (W1) (g), W3 is the weight of dish with residue after ignition (W3) (g). The result is in mg/L.

What unit is inorganic solids reported in?

Inorganic (fixed) solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this inorganic solids calculation follow?

It follows the calculation in IS 3025 (Part 18). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 100 ml, weight of empty dish (W1) = 45.12 g, weight of dish with residue after ignition (W3) = 45.1488 g, the result is inorganic (fixed) solids = 288.0 mg/L.

What mistakes should I look out for?

The weight after (W3) is less than before (W1). Check the weighings.

Is this inorganic solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.