Skip to content
STABLETDS

Total dissolved solids

GravimetricResult in mg/LIS 3025 (Part 16)

Weighed residue on a balance

Formula
TDS =(W2−W1)×1000000V

Your readings

3 of 3 filled

Example values shown.

ml
g
g
Total dissolved solidsCalculated live as you type
454.0 mg/L
Within the usual range. Most drinking water: up to 2,000 mg/L.

Calculations you finish this week are counted here, on this device only.

How total dissolved solids is calculated

Free total dissolved solids calculator (gravimetric method), following IS 3025 (Part 16). Enter 3 readings to get total dissolved solids in mg/L, with the formula filled in step by step.

  1. Total dissolved solids · mg/L

    TDS = (W2 − W1) × 1000000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
W1Weight of empty dish (W1)gusually 0–200 g
W2Weight of dish with residue (W2)gusually 0–200 g

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Weight of empty dish (W1): W1 = 48.2134 g
  • Weight of dish with residue (W2): W2 = 48.2361 g
  1. Total dissolved solids

    TDS = (48.2361 − 48.2134) × 1000000 / 50 = 454.0 mg/L

Result: Total dissolved solids 454.0 mg/L.

Checks and units

  • Typical values: Most drinking water: up to 2,000 mg/L
  • The weight after (W2) is less than before (W1). Check the weighings.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate total dissolved solids by the gravimetric method?

Total dissolved solids = (W2 − W1) × 1000000 / V. Here V is the volume of sample taken (ml), W1 is the weight of empty dish (W1) (g), W2 is the weight of dish with residue (W2) (g). The result is in mg/L.

What unit is total dissolved solids reported in?

Total dissolved solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this total dissolved solids calculation follow?

It follows the calculation in IS 3025 (Part 16). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, weight of empty dish (W1) = 48.2134 g, weight of dish with residue (W2) = 48.2361 g, the result is total dissolved solids = 454.0 mg/L.

What is a typical total dissolved solids value?

Most drinking water: up to 2,000 mg/L

What mistakes should I look out for?

The weight after (W2) is less than before (W1). Check the weighings.

Is this total dissolved solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.