Skip to content
SS

Settleable solids

CalculationResult in mg/LIS 3025 (Part 19)

Worked out from two results

Formula
SS =TSS−NSS

Your readings

2 of 2 filled

Example values shown.

mg/L
mg/L
Settleable solidsCalculated live as you type
207.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How settleable solids is calculated

Free settleable solids calculator (calculation method), following IS 3025 (Part 19). Enter 2 readings to get settleable solids in mg/L, with the formula filled in step by step.

  1. Settleable solids · mg/L

    SS = TSS − NSS

What you need

SymbolReadingUnitNotes
TSSTotal suspended solidsmg/Lusually 0–5000 mg/L
NSSNon-settleable solidsmg/Lusually 0–5000 mg/L

Worked example

Readings:

  • Total suspended solids: TSS = 245 mg/L
  • Non-settleable solids: NSS = 38 mg/L
  1. Settleable solids

    SS = 245 − 38 = 207.0 mg/L

Result: Settleable solids 207.0 mg/L.

Checks and units

  • Non-settleable solids can't be more than total suspended solids.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate settleable solids by the calculation method?

Settleable solids = TSS − NSS. Here TSS is the total suspended solids (mg/L), NSS is the Non-settleable solids (mg/L). The result is in mg/L.

What unit is settleable solids reported in?

Settleable solids is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this settleable solids calculation follow?

It follows the calculation in IS 3025 (Part 19). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With total suspended solids = 245 mg/L, Non-settleable solids = 38 mg/L, the result is settleable solids = 207.0 mg/L.

What mistakes should I look out for?

Non-settleable solids can't be more than total suspended solids.

Is this settleable solids calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.