Skip to content
NMHC

Non-methane hydrocarbons

Analyser (ppm to mg/m³ and g/kWh)Result in mg/m³IS 11255CPCB DG set norms

Flue gas analyser reading in ppm

Formulas, in order
Non-methane hydrocarbons · mg/m³
mg =ppm×44.09724.45
Non-methane hydrocarbons · g/kWh
gkwh =0.002002×ppm

Your readings

1 of 1 filled

Example values shown.

ppm
Molecular weight of NMHCConstant · fixed by the method44.097🔒
Molar volume at 25 °C and 1 atmConstant · fixed by the method24.45L
g/kWh per ppmConstant · fixed by the method0.002002🔒
Non-methane hydrocarbonsCalculated live as you type
757.49 mg/m³mg/m³
  • Non-methane hydrocarbons0.841 g/kWh
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How Non-methane hydrocarbons is calculated

Free Non-methane hydrocarbons calculator (analyser (ppm to mg/m³ and g/kWh) method), following IS 11255, CPCB DG set norms. Enter 1 reading to get Non-methane hydrocarbons in mg/m³, with the formula filled in step by step.

  1. Non-methane hydrocarbons · mg/m³

    mg = ppm × 44.097 / 24.45

  2. Non-methane hydrocarbons · g/kWh

    gkwh = 0.002002 × ppm

What you need

SymbolReadingUnitNotes
ppmNMHC readingppmusually 0–5000 ppm

Fixed values in the formula

SymbolConstantValue
44.097Molecular weight of NMHC44.097
24.45Molar volume at 25 °C and 1 atm24.45 L
0.002002g/kWh per ppm0.002002

Worked example

Readings:

  • NMHC reading: ppm = 420 ppm
  1. Non-methane hydrocarbons

    mg = 420 × 44.097 / 24.45 = 757.49 mg/m³

  2. Non-methane hydrocarbons

    gkwh = 0.002002 × 420 = 0.841 g/kWh

Result: Non-methane hydrocarbons 757.49 mg/m³; Non-methane hydrocarbons 0.841 g/kWh.

Questions

How do you calculate Non-methane hydrocarbons by the analyser (ppm to mg/m³ and g/kWh) method?

Work through 2 steps in order. Non-methane hydrocarbons: mg = ppm × 44.097 / 24.45. Non-methane hydrocarbons: gkwh = 0.002002 × ppm. Here ppm is the NMHC reading (ppm). The result is in mg/m³.

What unit is Non-methane hydrocarbons reported in?

Non-methane hydrocarbons is reported in mg/m³, to 2 decimal places.

Which standard does this Non-methane hydrocarbons calculation follow?

It follows the calculation in IS 11255, CPCB DG set norms. Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With NMHC reading = 420 ppm, the result is Non-methane hydrocarbons = 757.49 mg/m³ and Non-methane hydrocarbons = 0.841 g/kWh.

Is this Non-methane hydrocarbons calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All stack emissions calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.