Skip to content
CO

Carbon monoxide

NDIR (ppm to mg/m³)Result in mg/m³IS 5182 (Part 10)

Analyser reading in ppm

Formula
CO =ppm×28.0124.45

Your readings

1 of 1 filled

Example values shown.

ppm
Molecular weight of COConstant · fixed by the method28.01🔒
Molar volume at 25 °C and 1 atmConstant · fixed by the method24.45L
Carbon monoxideCalculated live as you type
1.375 mg/m³mg/m³
Within the usual range. 8-hour standard (NAAQS): 2 mg/m³.

Calculations you finish this week are counted here, on this device only.

How carbon monoxide is calculated

Free carbon monoxide calculator (NDIR (ppm to mg/m³) method), following IS 5182 (Part 10). Enter 1 reading to get carbon monoxide in mg/m³, with the formula filled in step by step.

  1. Carbon monoxide · mg/m³

    CO = ppm × 28.01 / 24.45

What you need

SymbolReadingUnitNotes
ppmCO readingppmusually 0–100 ppm

Fixed values in the formula

SymbolConstantValue
28.01Molecular weight of CO28.01
24.45Molar volume at 25 °C and 1 atm24.45 L

Worked example

Readings:

  • CO reading: ppm = 1.2 ppm
  1. Carbon monoxide

    CO = 1.2 × 28.01 / 24.45 = 1.375 mg/m³

Result: Carbon monoxide 1.375 mg/m³.

Checks and units

  • Typical values: 8-hour standard (NAAQS): 2 mg/m³

Questions

How do you calculate carbon monoxide by the NDIR (ppm to mg/m³) method?

Carbon monoxide = ppm × 28.01 / 24.45. Here ppm is the CO reading (ppm). The result is in mg/m³.

What unit is carbon monoxide reported in?

Carbon monoxide is reported in mg/m³, to 3 decimal places.

Which standard does this carbon monoxide calculation follow?

It follows the calculation in IS 5182 (Part 10). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With CO reading = 1.2 ppm, the result is carbon monoxide = 1.375 mg/m³.

What is a typical carbon monoxide value?

8-hour standard (NAAQS): 2 mg/m³

Is this carbon monoxide calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All ambient air calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.