Skip to content
352 nmO₃

Ozone

ColorimetricResult in µg/m³IS 5182 (Part 9)

Read at 352 nm

Formulas, in order
Volume of air sampled · m³
Va =Q×t1000
Ozone · µg/m³
O₃ =(Aₛ−A_b)×CF×1.962Va

Your readings

5 of 5 filled

Example values shown.

µg per Abs
L/min
min
Abs
Abs
Conversion factorConstant · fixed by the method1.962🔒
OzoneCalculated live as you type
18.2 µg/m³µg/m³
Within the usual range. 8-hour standard (NAAQS): 100 µg/m³.

Calculations you finish this week are counted here, on this device only.

How ozone is calculated

Free ozone calculator (colorimetric method), following IS 5182 (Part 9). Enter 5 readings to get ozone in µg/m³, with the formula filled in step by step.

  1. Volume of air sampled · m³

    Va = Q × t / 1000

  2. Ozone · µg/m³

    O₃ = (Aₛ − A_b) × CF × 1.962 / Va

What you need

SymbolReadingUnitNotes
CFCalibration factorµg per Absusually 0.1–200 µg per Abs
QAverage flow rateL/minusually 0.1–5 L/min
tSampling timeminusually 10–1440 min
AₛAbsorbance of sampleAbsusually 0–2 Abs
A_bAbsorbance of blankAbsusually 0–0.2 Abs

Fixed values in the formula

SymbolConstantValue
1.962Conversion factor1.962

Worked example

Readings:

  • Calibration factor: CF = 42 µg per Abs
  • Average flow rate: Q = 1 L/min
  • Sampling time: t = 480 min
  • Absorbance of sample: Aₛ = 0.118 Abs
  • Absorbance of blank: A_b = 0.012 Abs
  1. Volume of air sampled

    Va = 1 × 480 / 1000 = 0.4800 m³

  2. Ozone

    O₃ = (0.118 − 0.012) × 42 × 1.962 / 0.4800 = 18.2 µg/m³

Result: Ozone 18.2 µg/m³.

Checks and units

  • Typical values: 8-hour standard (NAAQS): 100 µg/m³
  • The sample absorbance is lower than the blank, so the result would be negative.

Questions

How do you calculate ozone by the colorimetric method?

Work through 2 steps in order. Volume of air sampled: Va = Q × t / 1000. Ozone: O₃ = (Aₛ − A_b) × CF × 1.962 / Va. Here CF is the calibration factor (µg per Abs), Q is the average flow rate (L/min), t is the sampling time (min), Aₛ is the absorbance of sample (Abs), A_b is the absorbance of blank (Abs). The result is in µg/m³.

What unit is ozone reported in?

Ozone is reported in µg/m³, to 1 decimal place.

Which standard does this ozone calculation follow?

It follows the calculation in IS 5182 (Part 9). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With calibration factor = 42 µg per Abs, average flow rate = 1 L/min, sampling time = 480 min, absorbance of sample = 0.118 Abs, absorbance of blank = 0.012 Abs, the result is ozone = 18.2 µg/m³.

What is a typical ozone value?

8-hour standard (NAAQS): 100 µg/m³

What mistakes should I look out for?

The sample absorbance is lower than the blank, so the result would be negative.

Is this ozone calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All ambient air calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.