Skip to content
460 nmC₆H₅OH

Phenols

4-Aminoantipyrine (chloroform extraction)Result in mg/LIS 3025 (Part 43)

Turns amber-red · read at 460 nm

Formula
C₆H₅OH =(A−B)×G.F×D

Your readings

5 of 5 filled

Example values shown.

ml
Abs
Abs
mg/L per Abs
Phenols as C₆H₅OHCalculated live as you type
0.019 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How phenols is calculated

Free phenols calculator (4-Aminoantipyrine (chloroform extraction) method), following IS 3025 (Part 43). Enter 5 readings to get phenols as C₆H₅OH in mg/L, with the formula filled in step by step.

  1. Phenols as C₆H₅OH · mg/L

    C₆H₅OH = (A − B) × G.F × D

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
BAbsorbance of blankAbsusually 0–0.2 Abs
AAbsorbance of sampleAbsusually 0–2 Abs (the usual 0–2 absorbance range)
G.FGraph factormg/L per Absusually 0.01–500 mg/L per Abs
DDilution factor—usually 1–1000

Worked example

Readings:

  • Volume of sample taken: V = 500 ml
  • Absorbance of blank: B = 0.004 Abs
  • Absorbance of sample: A = 0.096 Abs
  • Graph factor: G.F = 0.21 mg/L per Abs
  • Dilution factor: D = 1
  1. Phenols as C₆H₅OH

    C₆H₅OH = (0.096 − 0.004) × 0.21 × 1 = 0.019 mg/L

Result: Phenols as C₆H₅OH 0.019 mg/L.

Checks and units

  • The sample reading (A) is lower than the blank (B), so the result would be negative. Check both.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate phenols by the 4-Aminoantipyrine (chloroform extraction) method?

Phenols as C₆H₅OH = (A − B) × G.F × D. Here V is the volume of sample taken (ml), B is the absorbance of blank (Abs), A is the absorbance of sample (Abs), G.F is the graph factor (mg/L per Abs), D is the dilution factor. The result is in mg/L.

What unit is phenols reported in?

Phenols as C₆H₅OH is reported in mg/L, to 3 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this phenols calculation follow?

It follows the calculation in IS 3025 (Part 43). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 500 ml, absorbance of blank = 0.004 Abs, absorbance of sample = 0.096 Abs, graph factor = 0.21 mg/L per Abs, dilution factor = 1, the result is phenols as C₆H₅OH = 0.019 mg/L.

What mistakes should I look out for?

The sample reading (A) is lower than the blank (B), so the result would be negative. Check both.

Is this phenols calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.