Skip to content
SO₃²⁻

Sulphite

IodometricResult in mg/LIS 3025 (Part 28)

Colourless → blue at the endpoint (starch)

Formula
SO₃²⁻ =(A−B)×N×40000V

Your readings

4 of 4 filled

Example values shown.

ml
N
ml
ml
Equivalent weight of SO₃ × 1000Constant · fixed by the method40000🔒
Sulphite as SO₃²⁻Calculated live as you type
18.00 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How sulphite is calculated

Free sulphite calculator (iodometric method), following IS 3025 (Part 28). Enter 4 readings to get sulphite as SO₃²⁻ in mg/L, with the formula filled in step by step.

  1. Sulphite as SO₃²⁻ · mg/L

    SO₃²⁻ = (A − B) × N × 40000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
NNormality of KI-KIO₃Nusually 0.005–0.1 N
BKI-KIO₃ used for blankmlusually 0–2 ml
AKI-KIO₃ used for samplemlusually 0–50 ml (a 50 ml burette)

Fixed values in the formula

SymbolConstantValue
40000Equivalent weight of SO₃ × 100040000

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • Normality of KI-KIO₃: N = 0.0125 N
  • KI-KIO₃ used for blank: B = 0.05 ml
  • KI-KIO₃ used for sample: A = 1.85 ml
  1. Sulphite as SO₃²⁻

    SO₃²⁻ = (1.85 − 0.05) × 0.0125 × 40000 / 50 = 18.00 mg/L

Result: Sulphite as SO₃²⁻ 18.00 mg/L.

Checks and units

  • The sample titre (A) is less than the blank (B), so the result would be negative.
  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water).

Questions

How do you calculate sulphite by the iodometric method?

Sulphite as SO₃²⁻ = (A − B) × N × 40000 / V. Here V is the volume of sample taken (ml), N is the normality of KI-KIO₃ (N), B is the KI-KIO₃ used for blank (ml), A is the KI-KIO₃ used for sample (ml). The result is in mg/L.

What unit is sulphite reported in?

Sulphite as SO₃²⁻ is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water).

Which standard does this sulphite calculation follow?

It follows the calculation in IS 3025 (Part 28). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, normality of KI-KIO₃ = 0.0125 N, KI-KIO₃ used for blank = 0.05 ml, KI-KIO₃ used for sample = 1.85 ml, the result is sulphite as SO₃²⁻ = 18.00 mg/L.

What mistakes should I look out for?

The sample titre (A) is less than the blank (B), so the result would be negative.

Is this sulphite calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.