Skip to content
Ca²⁺

Calcium

EDTA titrimetricResult in mg/LIS 3025 (Part 40)

Pink → purple at the endpoint (murexide)

Formula
Ca =A×B×0.4×1000×DV

Your readings

4 of 4 filled

Example values shown.

ml
ml
mg/ml
Calcium in CaCO₃ (40 ÷ 100)Constant · fixed by the method0.4🔒
Calcium as CaCalculated live as you type
56.00 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How calcium is calculated

Free calcium calculator (EDTA titrimetric method), following IS 3025 (Part 40). Enter 4 readings to get calcium as Ca in mg/L, with the formula filled in step by step.

  1. Calcium as Ca · mg/L

    Ca = A × B × 0.4 × 1000 × D / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AEDTA used for samplemlusually 0–50 ml (a 50 ml burette)
DDilution factor—usually 1–1000
Bmg CaCO₃ equal to 1.0 ml EDTAmg/mlusually 0.5–1.5 mg/ml

Fixed values in the formula

SymbolConstantValue
0.4Calcium in CaCO₃ (40 ÷ 100)0.4

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • EDTA used for sample: A = 7 ml
  • Dilution factor: D = 1
  • mg CaCO₃ equal to 1.0 ml EDTA: B = 1 mg/ml
  1. Calcium as Ca

    Ca = 7 × 1 × 0.4 × 1000 × 1 / 50 = 56.00 mg/L

Result: Calcium as Ca 56.00 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of Ca: 20).

Questions

How do you calculate calcium by the EDTA titrimetric method?

Calcium as Ca = A × B × 0.4 × 1000 × D / V. Here V is the volume of sample taken (ml), A is the EDTA used for sample (ml), D is the dilution factor, B is the mg CaCO₃ equal to 1.0 ml EDTA (mg/ml). The result is in mg/L.

What unit is calcium reported in?

Calcium as Ca is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of Ca: 20).

Which standard does this calcium calculation follow?

It follows the calculation in IS 3025 (Part 40). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, EDTA used for sample = 7 ml, dilution factor = 1, mg CaCO₃ equal to 1.0 ml EDTA = 1 mg/ml, the result is calcium as Ca = 56.00 mg/L.

Is this calcium calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.