Skip to content
CaCO₃

Calcium hardness

EDTA titrimetricResult in mg/LIS 3025 (Part 40)

Pink → purple at the endpoint (murexide)

Formula
CaH =A×B×1000V

Your readings

3 of 3 filled

Example values shown.

ml
ml
mg/ml
Calcium hardness as CaCO₃Calculated live as you type
140.0 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How calcium hardness is calculated

Free calcium hardness calculator (EDTA titrimetric method), following IS 3025 (Part 40). Enter 3 readings to get calcium hardness as CaCO₃ in mg/L, with the formula filled in step by step.

  1. Calcium hardness as CaCO₃ · mg/L

    CaH = A × B × 1000 / V

What you need

SymbolReadingUnitNotes
VVolume of sample takenmlusually 1–1000 ml
AEDTA used for samplemlusually 0–50 ml (a 50 ml burette)
Bmg CaCO₃ equal to 1.0 ml EDTAmg/mlusually 0.5–1.5 mg/ml

Worked example

Readings:

  • Volume of sample taken: V = 50 ml
  • EDTA used for sample: A = 7 ml
  • mg CaCO₃ equal to 1.0 ml EDTA: B = 1 mg/ml
  1. Calcium hardness as CaCO₃

    CaH = 7 × 1 × 1000 / 50 = 140.0 mg/L

Result: Calcium hardness as CaCO₃ 140.0 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of CaCO₃: 50).

Questions

How do you calculate calcium hardness by the EDTA titrimetric method?

Calcium hardness as CaCO₃ = A × B × 1000 / V. Here V is the volume of sample taken (ml), A is the EDTA used for sample (ml), B is the mg CaCO₃ equal to 1.0 ml EDTA (mg/ml). The result is in mg/L.

What unit is calcium hardness reported in?

Calcium hardness as CaCO₃ is reported in mg/L, to 1 decimal place. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of CaCO₃: 50).

Which standard does this calcium hardness calculation follow?

It follows the calculation in IS 3025 (Part 40). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With volume of sample taken = 50 ml, EDTA used for sample = 7 ml, mg CaCO₃ equal to 1.0 ml EDTA = 1 mg/ml, the result is calcium hardness as CaCO₃ = 140.0 mg/L.

Is this calcium hardness calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.