Skip to content
K⁺

Potassium

Flame photometricResult in mg/LIS 3025 (Part 45)

Flame photometer reading

Formula
K =C×DF

Your readings

2 of 2 filled

Example values shown.

mg/L
Potassium as KCalculated live as you type
62.00 mg/L
Worked out with the formula above.

Calculations you finish this week are counted here, on this device only.

How potassium is calculated

Free potassium calculator (flame photometric method), following IS 3025 (Part 45). Enter 2 readings to get potassium as K in mg/L, with the formula filled in step by step.

  1. Potassium as K · mg/L

    K = C × DF

What you need

SymbolReadingUnitNotes
CPotassium read from the standard curvemg/Lusually 0–100 mg/L
DFDilution factor—usually 1–1000

Worked example

Readings:

  • Potassium read from the standard curve: C = 12.4 mg/L
  • Dilution factor: DF = 5
  1. Potassium as K

    K = 12.4 × 5 = 62.00 mg/L

Result: Potassium as K 62.00 mg/L.

Checks and units

  • Other units: ppm (1 mg/L ≈ 1 ppm in dilute water); meq/L (Equivalent weight of K: 39.1).

Questions

How do you calculate potassium by the flame photometric method?

Potassium as K = C × DF. Here C is the potassium read from the standard curve (mg/L), DF is the dilution factor. The result is in mg/L.

What unit is potassium reported in?

Potassium as K is reported in mg/L, to 2 decimal places. The calculator can also show it in ppm (1 mg/L ≈ 1 ppm in dilute water), meq/L (Equivalent weight of K: 39.1).

Which standard does this potassium calculation follow?

It follows the calculation in IS 3025 (Part 45). Check it against the current edition of the standard and your lab’s SOP before reporting.

Can you show a worked example?

With potassium read from the standard curve = 12.4 mg/L, dilution factor = 5, the result is potassium as K = 62.00 mg/L.

Is this potassium calculator free?

Yes. It’s free with no sign-up. The calculation runs in your browser and nothing you type is sent to NovaLIMS.

Related calculators

All water & waste water calculators →

Check results against your own method and SOP before reporting. Found an error? Tell us and we’ll check it.

Run every calculation inside your LIMS

NovaLIMS puts these calculators right beside each sample’s parameters, for every analyst in the lab.